Table of Contents
Advertisement
RESET
Please use the end of the paperclip to press the RESET button for 7
seconds, in order to reset the product back to factory setting.
Notes: The path recorded will be erased after reset.
CARE AND MAINTENANCE
Switch off the power of the Vertex-Link Mini before cleaning.
Apply soft and dry cloth onto the product ONLY.
Make sure there is no hair or lint caught between the wheels,
the drive shafts and the camera joint. Clean carefully with your
fingers or a pair of tweezers.
26
immediately.
The batteries may explode if mistreated. Do not attempt to
recharge or disassemble the batteries.
Use only fresh batteries of the required size and type. Do not mix
old and new batteries, Do not mix alkaline, standard (carbon-zinc),or
rechargeable(nickel-cadmium)batteries.
Non-rechargeable batteries are not to be recharged.
Rechargeable batteries are to be removed from the toy before being
charged.
Rechargeable batteries are only to be charged under adult
supervision.
Exhausted batteries are to be removed from the toy.
The supply terminals are not to be short-circuited.
CE INFORMATION
The items comply with the requirement R & TTE of EN
301489-17, EN 301489-1, EN 300 328, EN 62311. EN71-1,
EN71-2, EN71-3, EN62115, EN60825-1, ROHS 2 (Directive
7
Advertisement
Table of Contents
