CONTENT CONTENT VERTEX-LINK MINI QUICK START IMPORTANT SAFETY INSTRUCTIONS CE INFORMATION FCC INFORMATION VERTEX-LINK MINI PARTS VERTEX-LINK MINI PARTS VERTEX-LINK MINI APP INTERFACE SOFTWARE INSTALLATION REPLACEMENT OF WHEELS BATTERY INSTALLATION POWER AND CONNECTION LED STATUS CONVENTION: MOVEMENT CONTROL GRAVITY SENSOR...
Page 4
Sometimes no sound is recorded when I do the video recording, why? RESET Vertex-Link Mini will turn off the audio recording if it is in movement. CARE AND MAINTENANCE Annoying sound comes out when I put my phone device near...
The video transmission quality is poor (freezing or discoloration) Turn on the power. When the blue LED The Vertex-Link Mini is out of maximum operating range, battery is flashes, connect your phone device to the SSID low. of the VLM inside the Wi-Fi setting.
Page 6
The unit should be situated away from direct sunlight or heat sources. SPECIFICATION This product can be operated in the EU without restrictions indoor, but can’t be operated outdoors in France in the whole of the band, Product Dimension…………….. Length: 202mm only in frequency from 2400MHz to 2454MHz.
CARE AND MAINTENANCE Rechargeable batteries are only to be charged under adult Switch off the power of the Vertex-Link Mini before cleaning. supervision. Apply soft and dry cloth onto the product ONLY. Exhausted batteries are to be removed from the toy.
unsynchronized video and sound clips. 2011/65/EU), Cadmium Content (Directive 91/338/EC), Phthalates Content 2005/84/EEC. INFORMATION The items comply with the requirement of WEEE directive 2002/96/EC. For iOS™ user, press to enter the information page. The page FCC INFORMATION shows the software version, firmware version, application icon and "This device complies with Part 15 of the FCC Rules.
Page 9
in accordance with the instructions, may cause harmful interference Press again to stop the video recording. to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment For iOS™, the recorded video is in MOV format and is stored at the does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the default photo folder.
The recorded action will be overwritten if a new set of action is Headlight(2) Tail-light recorded. The recorded action will be erased if Vertex-Link Mini is reset. Please be careful about he memory usage of the device if the recording action involves snapshot taking, and/or video recording.
Straight line movement PLAYBACK & PATROL slot SSID label Screws for battery Vertex-Link Mini can record up to around 60 seconds of action, such compartment as a driving path, snapshot taking, or even video recording. Battery door Reset Record: press...
VERTEX-LINK MINI APP INTERFACE NIGHT VISION Direction Control Information Video record Record path Press to activate the night vision sensor, press again to Play path Play path in N loops Night Vision Gravity sensor turn off the night vision. Sound level...
* Please note different control layout might apply SNAPSHOT TAKING SOFTWARE INSTALLATION Press to activate this function. Pictures will be saved to your iOS™ go to App Store, Android™ go to Google device. play search for VLM and download the free app. Note: Number of pictures can be saved depends on the size of your device.
POWER AND CONNECTION to control the volume. Android™ will have control through individual Slide the switch on the bottom of Vertex-Link Mini to on. The hardware settings. ORANGE LED will light up. Wait approximately 30 seconds, the connection BLUE LED will begin to blink.
(begins with VLM_ with 12 digits follows) will appear as an available connection. Note: Each Vertex-Link Mini has a unique SSID address (printed on the bottom of the unit). If there is more than one Stop: release all buttons.
Exit out of the Settings and open the Vertex-Link Mini App. The BLUE LED will turn from blinking to solid. You will see the view taking from the Vertex-Link Mini on the device and you are ready to go. Turn left-forward: Move the joystick position to left or left upper top.