Battery Installation; Power And Connection - Acctron Vertex-Link Mini User Manual

BATTERY INSTALLATION

Remove the BATTERY DOOR by unscrewing the access screw on
the cover with a small screwdriver.
Remove the cover and insert 4 x AA batteries according to the
polarity indicators inside the compartment.
Replace the BATTERY DOOR and tighten the screw to secure.

POWER AND CONNECTION

Slide the switch on the bottom of Vertex-Link Mini to on. The
ORANGE LED will light up. Wait approximately 30 seconds, the
connection BLUE LED will begin to blink.
14
disappear from your device's screen. To drive, just tilt your device
in the direction you would like to drive. Press the
to turn off this function. The manual drive buttons will reappear on
your screen.
Note: The horizontal 0° is set to the angle when you press the
button every time.
AUDIO FROM THE CAR
Press button to activate this function. iOS™ will have slide bar
to control the volume. Android™ will have control through individual
hardware settings.
Note: Audio will only transmit to device when the car is in still
motion, no audio will transmit when the car is in movement.
button again
19