StarVedia IC722w Quick Installation Manual

Full HD IP Network Camera
Setup the camera from a Smartphone/Tablet
Supported Smart phone system version
iOS iPhone、iPad
Requires iOS 6.0 or later
Android Smart phone、Tablet
Requires Android 4.0 or Later
Download the mCamView2 user manual here
h t t p : / / w w w . s t a r v e d i a . c o m / d o w n l o a d . h t m l
Download the mCamView2 APP
STEP 1
mCamView2
Scan the QR code to download the software "mCamView2"
from App Store for iPhone/iPad
or from Android Market for Android devices.
Power on the Camera
STEP 2
Connect the Power Adapter to the Camera
Do not connect the Ethernet cable.
WiFi Setup
STEP 3-1
My Wi-Fi Network My-Home
SSID: My Wi-Fi Network
Password
Mobile Connected to 2.4G Hz WiFi
Make sure your iPhone/Android
mobile is connected to a 2.4G Hz WiFi
router, this is the must.
Smart WiFi Setup
Open the App mCamView2, tap the "+"
icon to add the camera, choose "Smart
WiFi setup" to setup the camera with
WiFi connection.
Generate QR Code
Follow the steps and enter the
WiFi password to generate a QR code.
Quick Installation Guide
Press the WPS Button
button
Press the WPS Button on the Camera.
The LEDs will start flashing.
Scan the QR Code
Place your mobile about 10-30cm away
from the camera.
The camera will beep when the QR code
is successfully scanned. It will flash the
LEDs and start the WiFi connection.
WiFi Connection is Established
When the WiFi connection is established,
the blue LED will be flashing and the red
My home
LED will remain on.
The new icon for this camera will be
created on the App.
Log in to the Camera
STEP 4
Tap the Camera icon to log in to the camera.
The default administration account is "admin",
the default administration password is empty (leave blank).
After logged in, tap the camera icon to play the live video.
Notice : there are two passwords for the camera, one is
the administration password, the other one is the video
play password. The default video-play password is "ipcam"
(lowercase).
My home

SD Card Recording

STEP 5
a Insert the SD card into the camera, the yellow LED on the
camera will be blinking.
b The SD card will start to do the recording once the alarm
notification is triggered. The camera will do 5 second
pre-recording to prevent the loss of the important starting
moment.
c To enable the continuous SD card recording, please enable it
inside the camera settings.
d To playback the recorded video, tap the on the App and
choose the "SD Card" and date/time to do the playback.
My home
My home
* Class 10 micro SD is prerequisite