StarVedia IC727FHD Quick Installation Manual

Full HD Outdoor IP Network Camera

Setup the camera from a Smartphone/Tablet

Download the mCamView2 user manual here

h t t p : / / w w w . s t a r v e d i a . c o m / d o w n l o a d . h t m l
Download the mCamView2 APP
STEP 1
mCamView2
Scan the QR code to download the software "mCamView2"
from App Store for iPhone/iPad
or from Android Market for Android devices.

Setup

STEP 2
A Connect the power adapter.
B Connect to the NAT/Router.
C The IP Camera will get an IP address
from the NAT/Router (with DHCP enabled) automatically.
Check if the red LED of the IP camera is always on.
If it's blinking, please check step A and step B again.
NAT or Router
WAN LAN
Internet
Supported Smart phone
system version
iOS iPhone、iPad
Requires iOS 6.0 or later
Android Smart phone、Tablet
Requires Android 4.0 or Later
RJ45 Coupler
Splitter Cable
Quick Installation Guide
Log in to the Camera
STEP 3
Tap the Camera icon to log in to the camera.
The default administration account is "admin",
the default administration password is empty (leave blank).
After logged in, tap the camera icon to play the live video.
Notice : there are two passwords for the camera, one is
the administration password, the other one is the video
play password. The default video-play password is "ipcam"
(lowercase).
admin
My home

SD Card Recording

STEP 4
a Insert the SD card into the camera, the yellow LED on the
camera will be blinking.
b The SD card will start to do the recording once the alarm
notification is triggered. The camera will do 5 second
recording to prevent the loss of the important starting moment.
c To enable the continuous SD card recording, please enable it
inside the camera settings.
d To playback the recorded video, tap the on the App and
choose the "SD Card" and date/time to do the playback.
My home
My home
* Class 10 micro SD is prerequisite
pre-