Be Performed By A Qualified Installer, Service Agency Or The - COZY 90N30A Installation And Operating Instructions Manual

Natural Gas - 90N30A, 90N50A, 90N65A
!
WARNING: If the information in these
instructions is not followed exactly, a fire or
explosion may result causing property damage,
personal injury or loss of life.
— Do not store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any other
appliance.
— WHAT TO DO IF YOU SMELL GAS
• Do not try to light any appliance.
• Do not touch any electrical switch; do not use any
phone in your building.
• Immediately call your gas supplier from a neighbor's
phone. Follow the gas supplier's instructions.
• If you cannot reach your gas supplier, call the fire
department.
— Installation and service must be performed by a
qualified installer, service agency or the gas supplier.
INSTALLER: Leave this manual with the appliance.
CONSUMER: Retain this manual for future reference.
dusty, wet, corrosive, or explosive conditions. Such conditions will invalidate the warranty and may create unsafe conditions.
WARNING: OPERATION OF THIS FURNACE WHEN NOT CONNECTED TO A PROPERLY INSTALLED AND MAINTAINED
VENTING SYSTEM CAN RESULT IN CARBON MONOXIDE (C.O.) POISONING AND POSSIBLE DEATH. FOR YOUR
SAFETY, THIS FURNACE AND THE VENTING SYSTEM SHOULD BE INSPECTED AT LEAST ANNUALLY BY A QUALIFIED
SERVICE TECHNICIAN.
Cozy Heating Systems, LLC | cozyheaters.com | 855-589-5380 | 3230 Industrial Pkwy | Jeffersonville, IN 47130
Installation and Operating Instructions
GAS-FIRED VENTED
FLOOR FURNACE
- The coating selected to provide longer
life to the heat exchanger may smoke
slightly upon initial firing. Please
provide adequate ventilation if this
occurs.
- Installation, maintenance, service,
troubleshooting
performed by a qualified service agency.
DO NOT attempt any of these procedures
if you are not qualified as this could
expose you to property damage, personal
injury, or loss of life and will invalidate all
warranties.
- This unit is for residential use only and is not
approved for installation in mobile homes,
greenhouses, or environments involving
Page 1
Back to Index
Millivolt Control System
90N
& repairs must be
1017826-A