To Edit The Input Source Name - Samsung LTN406W Owner's Instructions Manual

venus-04-en 6/28/03 8:16 AM
O
P E R AT I O N

To Edit the Input Source Name

Name the input device connected to the input jacks to make your input source selection easier.
1
Press the MENU button to
display the on-screen menu.
Press the UP/DOWN
buttons to select "Input",
then press the ENTER
button.
Press the UP/DOWN
buttons to select "Edit Name",
then press the ENTER
button.
2
Press the UP/DOWN
buttons to select
"Video1", "Video2",
"S-Video", "Component1",
"Component2" or "PC/DVI",
then press the ENTER
button.
3
Press the UP/DOWN
buttons repeatedly until the
correct VCR appears.
After the VCR is entered,
press the ENTER
Page 26
button.
26
English-