Replacing The Bean Hopper; Automatic Cleaning - Baratza Maestro Plus Operation Manual

A thorough, fast, and easy cleaning can be accomplished using
dz™ grinder cleaner. Grindz™ is a product designed to dislodge coffee
particles and absorb and remove odors and coffee oil residue. Simply
place the recommended amount of Grindz™ (2 Tbs. ) into the empty
grinder hopper. Adjust grind setting to 20,
and operate as if grinding coffee beans
until all of the Grindz™ has been ground.
Once complete, we recommend passing
twice as much coffee (4 Tbs.) through to
remove any Grindz™ residue. Discard
the ground coffee. For information on
Grindz™ go to www.urnex.com.
Grindz™ can be purchased at www.
baratza.com
Clean the Coffee-Dispensing Chute
Remove the grounds bin. Using your bristle
brush, clean out any coffee grounds that may
be accumulating in the coffee-dispensing chute.
Clean out any ground coffee that has fallen in the
bin area. Replace the the grounds bin.

Replacing the Bean Hopper

To replace the bean hopper, line up the two tabs
on the base of the hopper (with the small tab on
the right side) with their respective slots in the
top of the grinder housing and insert the hop-
per into the grinder. Once the hopper is in place
rotate it clockwise to your desired grind setting.

Automatic Cleaning


Grin-