(*) If the LED on the BaracodaPencil is not double flashing green, this may possibly mean:
The BaracodaPencil is low on power. Charge the unit up completely and try again
The BaracodaPencil has not been reset. Reset it and try again
The BaracodaPencil has been programmed from its default status and it is not able to decode
the Code 128 symbology. Be aware that the pairing barcode is a code128 and so the
BaracodaPencil shall stay in its default mode "Code128
(**) If the LED on the BL/BC/BLR2604 is not double flashing a green light, this may possibly mean:
The scanner is low on power. Charge the unit up completely and try again
The scanner has not been reset. Reset it and try again
The scanner has been programmed from its default status and it is not able to decode the
Code 128 symbology. Be aware that the pairing barcode is a code128 and so the scanner shall
stay in its default mode "Code128 on"
Data Capture
for Workforce
on"
in Motion