Advertisement
8. O
PERATING
To turn on the PDP-501 system, following the instructions listed below:
Turn on the power in following order only
Turn the power ON to the Media Receiver
1
Turn the power ON to the Plasma Display
2
Once both units have been turned ON, continue with the procedure
Press the Power On button on the Remote Control
3
To turn the power OFF, press the main buttons on the Media Receiver and the Display
NOTE: The system will automatically enter Stand-By mode if no signals are received
within 8 minutes.
NOTE: If the main power is switched off to either the Media Receiver or the Plasma
Display, the appropriate indicator light flashes yellow.
I
NSTRUCTIONS
The PDP-501 is now in Stand-By mode
Page 10
Quick Start Installation Instructions
Color of the Indicator
Media Receiver
Flashing Yellow
Flashing Yellow
to Green
Green to Red
Plasma Display
No Action
Green
Green to Red
Advertisement
