EMPORIA GLAM V34 Short Manual

EMPORIA EMERGENCY CALL FUNCTION

You can save up to five emergency numbers (family members,
friends and official institutions).
¡ In an emergency press and hold the emergency button on the
back of the phone. (This works even when the phone is closed.)
¡ The five preset numbers will be dialled automatically in the
order you have saved them.
If it is not possible to get through to anyone on the first
number, the second number will automatically be dialled.
If it is not possible to get through to anyone on the second
number, the third number will automatically be dialled,
and so on. (The phone will go through a list of five numbers
a maximum of three times.)
¡ At the same time as each emergency call, a text message
(SMS) will be sent to the contact, saying: »You are about to
receive an emergency call. An audible warning signal will
sound when you answer the call. Please press the 0 key
three times to establish the connection.«
Note: The contact must press the 0 key within 60 seconds, or
the call will be disconnected (to prevent your emergency call
going through to a contact's mailbox).
¡ From the moment you make an emergency call, your
emporia phone will automatically answer any incoming calls
for one hour. To disable this function, turn your phone off
completely using and then turn it on again.
¡ To cancel the emergency call, press and hold .
¡ During the emergency call, a warning tone will sound contin­
uously, to alert anyone nearby and the person being called.
¡ If you do not have any emergency numbers saved, have
no credit on your prepaid phone card or are connected to
a foreign network without permission (e.g. roaming is not
activated), 112 will be dialled when you press the emergency
button.
Note: If you want to add the number of an official institution
such as the police or fire brigade as an emergency number,
you must check that this is okay with the respective
institution beforehand. We do not assume liability for any
costs incurred through you calling such an institution by
mistake.

Adding/editing emergency numbers:

In the Settings menu _ Emergency numbers
_ Add emergency number
_ Select an entry (e.g. EmNo. 1) by pressing
_ Select OK by pressing
_ Select Private or Help organisation
_ Select a contact

Activating the emergency button:

In the Settings menu _ Emergency numbers
_ Emergency button _ On/Off
Pre alarm:
The pre alarm is a warning tone that sounds for ten seconds
and alerts anyone nearby to the emergency. After this, the
emergency call sequence starts.
In the Settings menu _ Emergency numbers
_ Pre alarm _ On/Off

SETTINGS

In the Settings menu _
Sound & alerts:
You can personalise the settings for tones, signals and
vibration or select a set of predefined settings (profile).
¡ Menu items: Ringtone, Alarm melody, Ringer volume,
Silent/Sleep mode, Meeting/Theater mode,
Maximum/Bus mode, Increasing ring, Vibra for call, Vibra
for alarm, Key tones, Message alert, Vibra for messages,
Handset volume, Handsfree volume, Confirmation tone,
Emergency tone
¡ Silent/Sleep mode profile
Visual notifications only (torch LED flashes, notifications on
the external display), no ringtone, no vibration function
¡ Meeting/Theater mode profile
Visual notifications (torch LED flashes, notifications on the
external display), device vibrates, no ringtone
¡ Maximum/Bus mode profile
Key tones, SMS tone and vibration function activated,
ringtone volume is set on maximum
Mailbox number:
Enter the number for your mailbox. You will find this number
in the documents supplied by your network provider.

Security settings:

¡ PIN: PIN request on/off, change PIN
¡ Phone code: on/off, change (factory preset code: 1234)

Master reset:

You can restore all the factory settings on your phone
(factory preset code: 1234).
SYMBOLS ON THE EXTERNAL DISPLAY
Symbols are only visible when the phone is closed and
disappear when it is opened.
Time:
Pressing or displays
the time.
Incoming call:
The number or name of the caller is displayed.
Missed call:
Flashes when you miss a call
New message:
Flashes when new messages are received
Low battery:
Flashes when the battery is low
Battery charging:
Fills up when the battery is being charged via
the charging cable or charging unit
Emergency call:
Appears when the emergency button is pressed

Alarm clock:

Appears when the alarm clock goes off
Snooze:
Appears when the alarm clock is set on snooze
with the key (the alarm clock goes off again
five minutes later)
TOOLS
In the Tools menu _
Alarm clock:
¡ Setting the time:
Enable the alarm clock _ Enter the time
_ Confirm by pressing . The alarm clock will now
go off at the time you have set every day.
¡ Off: Disable alarm clock
Switch off the ringing alarm clock by pressing .
Mute the alarm by pressing or
(it will ring again after five minutes).

Bluetooth:

This function allows you to use Bluetooth­enabled
handsfree kits wirelessly.
¡ Bluetooth on/off:
Enable/disable Bluetooth
¡ Connect _ Search for new devices:
Search for devices you want to connect
_ Select devices by pressing .
The next time you enable Bluetooth, devices that have
been connected before will be recognised and connected
automatically.

CAMERA AND PHOTO ALBUM

Your phone has a camera. You will find photos you have taken
in the menu under Photo album.
Taking a photo:
In standby mode, enable the camera by pressing .
_ Press to take a photo.
Camera options:
In the Settings menu _ Camera settings _
Auto timer, Effect, Size, Quality and Night mode.
Photo album:
Your photos will be saved in the Photo album menu.
and/or let you flick through the photo album.
¡
¡ Pressing opens Options for the selected picture.
Available options: View, Send, Wallpaper, Contact photo,
Rename, Delete, Delete all and Memory
Note: You can connect your phone to a PC using the USB data
cable and transfer your photos.
Note: Using a micro SD card will increase the storage capacity
of your phone. You can purchase these cards from electronics
stores.

FREQUENTLY ASKED QUESTIONS

The display screen is just blank/black:
The phone is either in energy­saving mode
(press any key), or it is switched off.
_ In this case, press for two seconds to turn it on.
The phone is not responding:
Take out the battery, reinsert it and switch on the phone.
If the phone still doesn't respond, please contact our
service centre.
The phone won't charge:
The phone can take a few minutes to start charging.
If it doesn't appear to have started charging after more than
30 minutes, please contact our service centre.
GLAM
Part no.: V34_ShortManual-V1a_55376-ENG | 201405 | Subject to mistakes, printing errors and technical changes.

INSERTING A SIM CARD

Fig. 1 Fig. 2
Fig. 1: Remove the battery cover.
Fig. 2: Slide the SIM card into the SIM card holder
with the gold contacts facing down.

INSERTING AND CHARGING THE BATTERY

Fig. 3 Fig. 4 Fig. 5
Fig. 3: Insert the battery, making sure that the battery contacts
touch the phone's gold contacts.
Fig. 4: Slide the battery cover into its position over the battery.
You will know it is in the correct position when you hear it
click into place.
Fig. 5: Plug the charging cable into the USB port on the top of
the phone.
Attention: Charge the battery for at least four hours before
using it the first time. Only use batteries and chargers that
are permitted for use with this specific model.