Advertisement
■
STEP 12: Setting up more things
Select apps to add. When you set the fingerprint authentication or screen
lock unlock method, set the notification for the lock screen.
1
2
3
[Control lock screen
Select the notification
[Review additional
notifications]
*1*2
method→[DONE]
apps]
*2
*1
Does not appear if you do not set the fingerprint authentication or screen lock
unlock method.
*2
To end without setting more items, tap "ALL SET".
4
Unmark apps not to
add→[OK]
au-mail setting
●To use au-mail, subscription to LTE NET is required. If you did not
subscribe it when you purchased the product, contact an au shop or
Customer Service Center.
●Perform the initial settings in a place with good signal condition in Japan.
If you perform in a place with bad signal condition or while moving,
the settings may fail. The initial setting cannot be made via Wi-Fi
®
communication.
●Depending on time zone, the initial settings may take from 30 seconds to
3 minutes.
Wait for a while with "Eメールアドレスの設定中です。しばらくお待ちくだ
さい。 (Setting email address. Wait for a while.)" displayed on the screen.
■
Initial settings
1
2
3
From the Home
Confirm the content→[Agree]
Checking au-mail
screen, [
]
→Confirm the content→[Agree]
address→
→Follow the onscreen instruction
[閉じる (Close)]
to proceed
* For change of model, the au-mail address which you have been used so far is displayed.
■
Checking au-mail address
1
From the Home screen, [
]→[
]→[E-mail information]
■
STEP 13: Completion of setup
1
[FINISH]
● Downloading of the applications selected in "STEP 12" starts when the
®
product is connected to Wi-Fi
. When connected to the mobile network,
downloading is paused and will resume when you connect to Wi-Fi
®
after
the au initial settings.
To download via mobile network, after the au initial settings, slide the status
bar down→Open the notification of "Setup paused"→[USE DATA].
■
Checking the operations of au-mail app
1
2
From the Home
[Operation guide]
screen, [
]→[
]
■
Changing au-mail address
1
From the Home screen, [
]→[
]→[Change Address/Setting Filter]
2
[メールアドレスの変更へ (To change Mail address)]→Enter the
security code→[送信 (Send)]
3
Confirm the content→[承諾する (I agree)]→Mark "ご希望のメールア
ドレスに変更する (Change to your desired mail address)" and enter a
mail address
*1
→[送信 (Send)]→[OK]
*1 When you mark "○○○○○○@au.comへ変更する (Change to
○○○○○○@au.com)", only the domain name is changed from "@ezweb.
ne.jp" to "@au.com". Mails received via the previous mail address are
automatically forwarded to the new mail address (this item does not appear
when you already use "@au.com").
* When the confirmation screen appears, follow the onscreen instructions.
* The operations or the screen displays are subject to change without notice.
■
au initial settings
Update preinstalled apps, setting au ID, download previously used apps, or
make settings for using the product more convenient.
●By setting au ID, you can use various services provided by au such as au
スマートパス (au Smart Pass) or "au Kantan Kessai", which allows you to
purchase apps from Google Play.
●Alternatively, after the initial setting is complete, from the Home screen, tap
[
]→[Settings]→[au Settings]→[au Settings Menu]→[au Initial Setting].
1
2
3
*1
*2
Mark/unmark "Update"
[Sign in]
Enter PIN number
→[次へ (Next)]
→[GET STARTED]
*1
If you have already been registered au ID, step 3 and 4 will not appear. Proceed to
step 5.
*2
PIN number is a four digit number chosen by the customer and noted on the
application form.
Transferring data from au Settings Menu
Import or export data between the product and your previous au mobile
phone using microSD memory card or via the au server.
● To import data using the au server, save data to the au server using
your previous au mobile phone in advance. To use the au server, set au
ID (If there is no au Settings Menu on your previous au mobile phone,
use "au Cloud" app).
●To import data using a microSD memory card, save the data to
a microSD memory card using your previous au mobile phone in
advance (If there is no au Settings Menu on your previous au mobile
phone, use au backup app).
1
2
3
From the Home
[Settings]→[au Settings]
[Data transfer]
* When the confirmation
screen, [
]
→[au Settings Menu]
screen appears,
follow the onscreen
4
instructions.
[機種変更はこちら (For
change of model, tap here)]
* After that, follow the onscreen
instructions.
● To back up photos and contacts to the au server automatically using
"Data storage App", operate as follows.
From the Home screen, [
]→[Settings]→[au Settings]→[au Settings
Menu]→[Backup Setting]→Mark items to back up automatically
4
5
6
Enter a password→
[次へ (Next)]
[OK]
[同意して次へ (Agree
and proceed)]
7
8
9
[ALLOW]
*3
Mark apps to install
*4
Mark items to set
→[Next]
→[Next]
*3
The conformation screen for app permission appears several times. Operate in the
same way.
*4
When "Select apps" appears in "Backed up", tap it to check the apps.
Setting the brightness of the screen
When the screen is dark and you cannot see the screen well, adjust the
screen brightness as you like.
1
2
3
From the Home
[Settings]→
[Brightness level]
screen, [
]
[Display]
4
Drag the slider left or right
* To finish the setting, tap "
".
● To adjust the screen brightness automatically according to the
ambient brightness based on the set value in "Brightness level",
from the Home screen, [
]→[Settings]→[Display]→Tap "
" of
"Adaptive brightness" to switch to
.
10
[Finish]
*5
*5
If there is any data backed up by "Data Storage App", you can restore them. Tap
"Restore from backup now" and then follow the onscreen instructions.
Setting the lighting time of the backlight
The screen backlight turns off automatically when the set time has elapsed
while no operation is made. When you cannot operate readily because the
backlight turns off soon, change the lighting time of the backlight.
1
2
3
From the Home
[Settings]→
[Sleep]
screen, [
]
[Display]
4
Select the lighting time
Advertisement
