Page 1
Electric Torque Screwdriver EF 120 Operators Manual EF 120 Instruction part Number P32230 Issue 4...
Page 2
Screwdriver/Controller Setup: 1. Attach power lead to the Screwdriver. Make sure notch in plug lines up with the notch on the socket. Tighten knurled ground ring. Attach power lead to the STC 30+ Controller. Make sure notch in plug lines up with the notch on the socket.
Page 3
Care: 1. The EF 120 screwdriver is a precision torque control instrument and should be handled with care at all times. 2. Only use the STC 30+ Controller listed with your EF 120 driver. (If you have any questions regarding the appropriate controller set-up, contact the Torqueleader Customer Service Department on 01483 894476).
Page 4
Accessory: The torque cover protects the EF-Series from incidental or operator tampering of the torque setting. Torque Cover EF 120 Protects the EF 120 from accidental adjustment or operator tampering of torque setting. Order Code: 090210 Testing Power Tools: 1. Application Method: Use a Torque Analyser in “Peak Mode” with a Rotary Transducer between the power tool and the application.