Samsung LE27S7 Owner's Instructions Manual page 34

Setting Up the Remote to Operate Your DVD
1. T urn off your DVD.
2. Press the dVd button on your TV's remote control.
3. Press the Set button on your TV's remote control.
4. U sing the number buttons on your remote control, enter three digits of the DVD
code listed on page 34~35 of this manual for your brand of DVD.
Make sure you enter three digits of the code, even if the first digit is a "0".
(If there is more than one code listed, try the first one.)
5. P ress the PoWer
Your DVD should turn on if your remote is set up correctly.
If your DVD does not turn on after set up, repeat steps 2, 3, and 4, but try one of
the other codes listed for your brand of DVD.
If no other codes are list-ed, try each code, 000 through 4.
N ote on Using Remote Control Modes: DVD
When your remote control is in "DVD" mode, the volume buttons still control your TV's volume.
Setting Up the Remote to Operate Your STB
1. T urn off your STB.
2. Press the StB button on your TV's remote control.
3. Press the Set button on your TV's remote control.
4. U sing the number buttons on your remote control, enter three digits of the STB
code listed on page 35 of this manual for your brand of STB.
Make sure you enter three digits of the code, even if the first digit is a "0".
(If there is more than one code listed, try the first one.)
5. P ress the PoWer
Your STB should turn on if your remote is set up correctly.
If your STB does not turn on after set-up, repeat steps 2, 3 and 4, but try one of
the other codes listed for your brand of STB.
(If no other codes are listed, try each code, 000 through 074.)
N ote on Using Remote Control Modes: STB
When your remote control is in "STB" mode, the volume buttons still control your TV's volume.
English-32
button on the remote control.
button on the remote control.