Denon DNP-800NE Quick Start Manual page 7

Wired
1 Connect a network cable
between your DNP-800NE
and your router.
(cable not included)
4 Follow the instructions
and tap Next.
Denon DNP-800NE
4
Select your network name.
(If your network name is not listed,
select "Rescan".)
Select Network
Network name
: :
enter back
ENTER BACK
4 Press the WPS button on
your router. Within 2 minutes,
press the ENTER button.
2 Power on.
3 Select language.
O RK
N ET W
4 Please wait while your DNP-800NE
connects to your wired network.
5 Please wait as completing the connection
can take a few minutes.
(The front panel of the DNP-800NE will show the status
of the connection.)
Denon DNP-800NE
Sharing the network...
5
Enter your network
password using the
number keys on the
remote control.
:
＋10 character type
5 Please wait as completing
the connection can take a
Quick Setup
few minutes.
Press the WPS button...
: :
connect back
ENTER BACK
(The front panel of the DNP-800NE will
show the status of the connection.)
Please wait as completing...
Quick Setup
Connected!
Enter Wi-Fi Password
:
１～９ a
Quick Setup
Connected!
Press the ENTER button.
Wi-Fi Connected
Access Point 1
: :
next back
ENTER BACK
If the signal strength
of your wireless
Wi-Fi
network is weak, to
improve reception,
please turn the
antenna on the back
of your DNP-800NE
or move your router
to the DNP-800NE.
6