Displaying Sources Of Quad Analog Video Card - Barco TransForm A User Manual

4.3.4 Displaying sources of Quad Analog Video Card

With a right click on the window of a Q
opened.
Setting of contrast
Setting of brightness
Setting of saturation
not applicable
Hue
Format Source
Display
Manual
The edges of video often show disturbances; therefore an overscan of some % can be de-
Overscan
fined that will not be displayed.
Values between 0% and 10% are possible
Default: 3%
Switch to 16:9 aspect ratio. Not applicable, if the Format Manual is selected.
16:9
Scale the video up to the whole display wall or in Channel Video mode to the projection
Fullscreen
cubes, which currently display a part of it.
Freeze / return to play (if the source is frozen, none of the displaying settings can be
changed and the Scaler settings dialog cannot be opened)
Source 0 (Disabled)
1 (Composite)
Setting of the used frame rate, default is 25/30 fps depending on the video standard, in
Frame Rate
addition 50/60 fps are selectable.
Displays the detected video standard. The standards
Standard
white at 50 frames per second (PAL, SECAM)),
second (NTSC)) are displayed. Also sub-standards may be displayed.
not applicable
Noise Reduction
not applicable
Deinterlace
Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 16 – August 2007
A V
UAD NALOG IDEO
Switch to native aspect ratio of source
Switch to native aspect ratio of projection module
Resize x and y independently
Video channel disabled
Select a composite video signal.
C the control panel for this type of video can be
ARD
, ,
NTSC PAL SECAM
(Black and white at 60 frames per
BW 60Hz
Video dialog box – Q
____________________________________________________________
4. Operating
Figure 4-6
Q A V C – dialog box
UAD NALOG IDEO ARD
, (Black and
BW 50Hz
Table 4-8
A V
UAD NALOG IDEO
C
ARD
4-20