Table of Contents
Advertisement
How to Set up Your Display Setting (Windows only)
Notes:
The plasma panel of this monitor is composed 1366 pixels & 768 lines. That is, the best resolution of
this monitor is 1366 X 768.
Thus, select 1366 X 768 resolution in same way as below when you control the display setting, If your
video card does not support 1366 X 768 resoution, the resolution of 1024 X 768 is recommended. If
you select one of resolutions above, you can use this monitor in best condition.
The Windows display-settings for a typical computer are shown below. But the actual screens on your
PC will probably be different, depending upon your particular version of Windows and your particular
video card. But even if your actual screens look different, the same, basic set-up information will apply
in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.
46
On the windows screen, select in the following
sequence : Start ➝ Settings ➝ Control Panel.
When the control panel screen appears, click on
"Display" and a display dialog-box will appear.
Select the "Settings" tab in the display dialog-box.
The two key variables that apply the PDP-PC inter-
face are "resolution" and "colors." The correct set-
tings for these two variables are:
• Size (sometimes called "resolution"):
1024 x 768 pixels.
• Color: "24-bit" color (might also be expressed
as "16 million colors")Shown at left is a typical
screen for "Display" dialog box.
If a vertical-frequency option exists on your dis-
play settings dialog box, the correct value is "60"
or "60 Hz." Otherwise, just click "OK" and exit
the dialog box.
Continued...
Advertisement
Table of Contents
