Samsung CT-21K40ML Owner's Instructions Manual

COLOUR TELEVISION

CT-21Z40ML / CT-21Z45ML
CT-21M40ML / CT-21K40ML
Owner's Instructions
Before operating, please read this manual thoroughly,
and retain it for future reference.
Register your product at www.samsung.com/global/register.
Record your Model and Serial number.
▪ Model __________ ▪ Serial No. __________
Control Panel
(depending on the model)
➢
The product colour and shape may vary depending on the
model.
Front (or Side) Panel
1 On-screen menu display
2 Volume adjustment
3 Channel selection
4 Remote control sensor
5 Standby indicator
6 Power on/off
 You can use the 3 buttons to switch the TV on when it is
in standby mode depending on the model.
 The 2 and 3 buttons also have the same function as the
◄/►/▲/▼ buttons on the remote control.
 If the remote control no longer works or you have
misplaced it, you can use the controls on the panel of the
television.
Connection Panel
(depending on the model)
➢
The product colour and shape may vary depending on the
model.
Rear Panel
☛
Whenever you connect an audio or video system to your
television, ensure that all elements are switched off.
☛
Please be sure to match the colour coded input terminals
and cable jacks.
Connecting to an Aerial or Cable Television Network
Connect the aerial or network input cable to the 1 (75 Ω
coaxial socket).
To view television channels correctly, a signal must be
received by the set from one of the sources: an outdoor aerial,
cable television network, or satellite network.
If you are using an indoor aerial, you may need to adjust it
when tuning your television until you obtain a picture that is
both sharp and clear.
Connecting to the RCA Output
The RCA2 connectors are used for equipment, such as a
recording VCR or audio system.
Connecting to the RCA Input
The RCA3 connectors are used for equipment, such as a
VCR, DVD, decoder, satellite receiver, video game device, or
video disc player. (When using the mono equipment, connect
to the AUDIO-L input connector.)
The RCA4 connectors are used for equipment such as a
DVD with component output (480i only).
English - 1
Side Jack
1 Audio input
2 Video input
3 Headphone jack
➢
Please be sure to match the color coded input terminals
and cable jacks.
When both the side and rear jacks (AV IN) are connected
to external equipment, the side receives priority.
1 Audio Input Jacks
Connect audio signals from a camcorder or video game.
2 Video Input Jack
Connect a video signal from a camcorder or video game.
3 Headphone Jack
Connect a set of external headphones to this jack for private
listening.
AA68-03905G-01