IntroMedic MiroCam User Manual page 8

MiroCam User Manual
1.4.1 Environmental Conditions for Operation
Temperature
Relative humidity
Atmospheric pressure : 700hPa to 1060hPa
WARNING
DO NOT operate the equipment in the vicinity of generators, power stations,
X-ray devices, and broadcasting stations where high levels of electro-
magnetic waves are generated. The electro-magnetic waves can cause
equipment malfunctions.
CAUTION
If the equipment has been brought in from a cold environment (stock room,
airfreight) into a warm room, initial activation should take place after a few
hours, to allow for temperature adjustment and balance and evaporation of
condensed humidity.
WARNING
DO NOT operate the equipment in the vicinity of heat sources, strong
electric or magnetic fields (close to a transformer), or near instruments
generating high-frequency signals.
WARNING
-
-
-
WARNING
This device is a Class B device according to EN60601-1-2 standards. This
equipment can cause radio interference in residential areas. In this case, the
owner (or operator) can be held responsible to take appropriate measures or
take proper measures for compensation.
한글판 버전 1.00
: -10 ℃ - +70 ℃ (Operating : +10 ℃ - +40℃)
: 10% - 80% (Operating : 45% - 75%)
Do not use this device when the output contains d.c. components.
Do not use the unit with h.f. surgical equipment. It may result in burns at the site
of the electrodes and possible damage to the capsule and receiver.
Do not use the unit in close radius (within 1 m) of short wave or microwave
therapy equipment. It may produce instability in the captured image.
8