Symbols For Safety - IntroMedic MiroCam User Manual

MiroCam User Manual

1.2 Symbols for Safety

This section describes a set of symbols that IEC (The International Electrotechnical
Commission) has established for medical electronic equipment to classify a connection or
warning of any potential hazards.
IEC 348: Notice for the user to pay special attention to the following details
IEC 878-02-03: Indicates that this is classified into Type BF equipment
EN 980: Denotes Date of Manufacture
EN 980: Denotes Date of Manufacture Address
IEC60601, ANNEX D: Denotes "ON" status of main power switch
IEC60601, ANNEX D: Denotes "OFF" status of main power switch
SN
EN 980: Denotes serial number
IEC 417-5031: Denotes DC (Direct Current)
IEC 417-5032: Denotes AC (Alternating Current)
A
Denotes Ampere, the unit of current
V
Denotes Volt, the unit of Voltage
Hz
Denote Herz, the unit of Frequency
IEC 417-5021: Denotes potential equalization terminal
Single Use Only
The Available Period
한글판 버전 1.00
3