CENTURION SYSTEMS SECTOR II Installation Manual page 6

• Safety devices must be fitted to the installation to guard against mechanical
movement risks, such as crushing, dragging and shearing
• It is recommended that at least one warning indicator light be fitted to every system
• Always fit the warning signs visibly to the inside and outside of the barrier
• The installer must explain and demonstrate the manual operation of the barrier in
case of an emergency, and must hand over the user guide to the user
• Explain these safety instructions to all persons authorised to use this barrier, and be
sure that they understand the hazards associated with traffic barriers
• Do not leave packing materials (plastic, polystyrene, etc.) within reach of children as
such materials are potential sources of danger
• Dispose of all waste products like packing materials, worn-out batteries, etc.
according to local regulations
• Always check the obstruction detection system and safety devices for correct
operation
• Neither Centurion Systems (Pty) Ltd, nor its subsidiaries, accepts any liability caused
by improper use of the product, or for use other than that for which the automated
system was intended
• This product was designed and built strictly for the use indicated in this
documentation. Any other use, not expressly indicated here, could compromise the
service life/operation of the product and/or be a source of danger
• Anything that has not been specified in these instructions may be considered a risk
to your safety, and the safety of others. If you are unsure of an installation matter,
please contact your nearest distributor
page 6
SAFETY INSTRUCTIONS
www.centsys.com