Hardware Unpacking - CENTURION SYSTEMS SECTOR II Installation Manual

SECTION 2

2.4. Hardware unpacking

When unpacking the SECTOR II, neccessary harware can be found attached to the
enclosure. The hardware is as follows:
1
2
3
4
5
6
1. M8 Nuts
(for boom pole retainer)
2. M8 Spring Washers
(for boom pole retainer)
3. M12 Heavy duty washers
(for the Hold Down Bracket)
FIGURE 4. PRODUCT IDENTIFICATION - HARDWARE
4. Hold down bracket
5. Boom pole retainer
6. 6mm Allen key (for manual override)
page 10
PRODUCT IDENTIFICATION
www.centsys.com