Us Warranty Statement - Husqvarna K 4000 Operator's Manual

K 4000
Note 1: Noise emissions in the environment measured as sound power (LWA) in conformity with directive
2000/14/EC. The difference between guaranteed and measured sound power is that the guaranteed sound power
also includes dispersion in the measurement result and the variations between different products of the same model
according to directive 2000/14/EC.
Note 2: Equivalent sound pressure level, according to EN ISO 19432, is calculated as the time-weighted energy to-
tal for different sound pressure levels under various working conditions. Reported data for equivalent sound pres-
sure level for the product has a typical statistical dispersion (standard deviation) of 1 dB (A).
Note 3: Equivalent vibration level, according to EN ISO 19432, is calculated as the time-weighted energy total for
vibration levels under various working conditions. Reported data for equivalent vibration level has a typical statistical
dispersion (standard deviation) of 1 m/s
Recommended abrasive and diamond
cutting blade
Cutting blade, mm (inch)
Max. peripheral speed, m/s (ft/s)
Max. blade speed, rpm
Max. cutting depth, mm (inch)
Max. cutting depth with the Vac attachment, mm (inch)
CAUTION: The below recommendations apply to minimum cable area relative to the maximum extension
cable. Follow the recommendations to avoid impaired performance and damage to the product.
Cable area
Input voltage 100-120 V
Input voltage 220-240 V
Warranty policy
All warranty claims will be determined after inspection at
a designated facility. A Returned Goods Authorization is
required for all warranty claims. Contact Husqvarna
Customer Service Department at 800-845-1312 for an
RGA. The customer must prepay the freight and absorb
any labor expense required to return or replace a
product submitted for warranty consideration.
Husqvarna will pay return shipping expenses for
repaired or approved replacement products.
EQUIPMENT
Equipment manufactured by Husqvarna is warranted to
be free from manufacturing defects in normal service for
24
2
.

US WARRANTY STATEMENT

350 (14)
100 (19600)
3900
125 (4 59/64)
119 (4 11/16)
1,5 mm
20 m
30 m
a period of two (2) years from date of purchase by the
original consumer purchaser. Component manufacturers
offer separate warranty periods. Call Technical Services
at 800-288-5040 for complete information.
Our obilgation under this warranty is expressly limited to
the replacement or repair at Husqvarna Construction
Products North America, Olathe, Kansas 66061, or at a
service facility designated by us, of such part or parts as
inspection shall disclose to have been defective.
This warranty does not apply to defects caused by
damage, unreasonable use, faulty repairs made by
others than an approved Husqvarna servicing dealer, or
defects caused by failure to provide reasonable
maintenence, while in the possession of the consumer.
Further, the warranty is void if the product, or any of its
2 2
2,5 mm
40 m
50 m
397 - 001 -