Auto Wall-Mount (Sold Separately) - Samsung BN68-01508J-00 User Manual

Auto Wall-Mount (Sold separately)

Once the auto wall mount is installed, your TV's position can be easily adjusted.
TV Rear Panel
Entering the menu
1. Press the ▲, ▼, ◄ or ► button on your remote control.
➣
The Auto Wall-Mount screen is displayed.
➣
If the Auto Wall-Mount screen is not displayed when
clicking on a direction button while watching your TV, use
the menu to display that screen.
• Press the MENU butt on to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENTER button.
• Press the ▲ or ▼ button to select "Auto Wall-Mount", then
press the ENTER
Remembering the Position
2. Adjust to the desired position using the ▲,▼,◄,► buttons.
➣
If you press an arrow button when no OSD is displayed on
the TV screen, the Adjustment screen appears.
➣
Press the INFO button to reset. Press the ◄ or ► button to
select "Yes", then press the ENTER
The position is initialized to the default setting.
3. Press the blue button.
Press the ▲ and ▼ buttons to select a save mode from either
Position 1, Position 2 or Position 3 in order to save the current
position.
➣
To not save the current position, press the RETURN button.
➣
When selecting a save mode, you cannot use the Colour
buttons.
4. Press the ENTER
➣
When Position1 is selected, the message "Current position
saved as Position1" is displayed.
5. Press the ENTER
➣
The saved Position appears on the left side of the OSD.
button.
button.
button to save.
button.
English - 45
Auto Wall-Mount
SERVICE Cable (Not supplied)
TV
Position1
Position
Adjust
Setup
Plug & Play
Language : English
Time
Auto Wall-Mount
Melody : Off
Entertainment : Off
Energy Saving : Off
PIP
Move Enter
Auto Wall-Mount
1 2
Save Center
Save
Select a mode to Save.
Position1
Position2
Position3
Move Enter Return








Return
3