Valves:
Valves
Shut-Off valves
A120-CS; A140-CS
Drain valves
AV100
4.2 Type of connection
Standard
: flanges according to DIN EN 1092-1
On request : flanges as per ASME
Butt welding ends according to DIN or ASME
Socket Welding ends according to DIN or ASME
4.3 Materials
Components in contact with the medium and pressure-holding components are
made of C steel or stainless steel according to DIN or ASME.
4.4 Application limits
Max. allowable pressure PS
Max. allowable temperature TS
4.5 Corrosion resistance
The safety of the unit is not influenced by corrosion if it is used as intended.
4.6 Identification plate / Marking
The following data are indicated on the identification plate:
* marking depending on the realization
A
Date of manufacture
B
Type of unit
C
Max. allowable pressure
D
Max. allowable temperature
E
Nominal pressure
F
Nominal diameter
8
Type
[bar]
32
[°C]
239