Risks And Safety Precautions; General Safety Instructions; Device-Specific Safety Instructions - Igema FLB1 Installation And Operating Instructions Manual

1. Risks and Safety Precautions

1.1 General safety instructions

Avoidance of risks to persons
• Observe accident prevention regulations and system-specific safety instructions.
• Only use the device supplied in accordance with the intended planning.
• Do not add to or modify the device without the approval of IGEMA GmbH.
Danger
• Read and observe fitting and operating instructions.
• The device must only be fitted and put into operation by appropriate trained persons.
Limitations of use
• The device must only be used in accordance with the instructions in this operating manual or for the
parameters agreed in the supply contract (see data plate) and the applications.
• Approval for this device loses its validity if modifications not agreed with us have been made.
• The safety of the whole boiler system into which this device is fitted lies in the responsibility of the installer of
the system.
• If this device is inserted incorrectly the function/protection expected from this device may be impaired.
Avoidance of risks and damage
• The installation and operating instructions are an integral part of the device and must be sent to the
departments responsible for "Goods in, transport, assembly, commissioning and maintenance". They must be
kept in such a way that the technical staff have access to these documents at all times.
• If this device is passed on to third parties, these installation and operating instructions in the relevant language
of the country must accompany it.
• Read and observe the installation and operating instructions carefully and keep them in a safe place.
• Take note of and follow the safety instructions in the individual sections of these operating instructions!
• When transporting, avoid e.g. knocks and putting down heavily, this can lead to damage.
• For intermediate storage, the unit must be stored dry and protected from damage.
• This device must not be used in potentially explosive atmospheres.

1.2 Device-specific safety instructions

• The fitting is under pressure during operation!
When flange connections, screw plugs or glands are released, hot water or steam will escape.
• Make sure the system pressure is zero before carrying out installation or maintenance work!
Danger
• The fitting is hot during operation! Severe burns may be sustained on hands and arms. Make
sure the system is cold before carrying out installation and maintenance work!
• Severe burns may be sustained over the whole body!
• When opening and dismantling the device, residue of the medium may escape; even with the system not
under pressure, fumes can escape.
• Installation work on the device must only be carried out by qualified and trained persons with the power to the
device switched off.
• Sharp-edged interior parts may cause cuts to the hands! Wear work gloves when working!
3