Programming Your Remote Control; Manual Mode - Samsung SIR-S60W Owner's Manual

Using Your Remote Control
Pr ogramming Y
Pr ogramming Y

Manual Mode

You can program your remote control to operate other components in your home
entertainment system such as your TV, VCR, or DVD player. You can enter individual
device codes using the manual mode.
1
Turn on the device you want to control.
2
Aim the remote control at the device.
3
Press the device button (example:
The device button should light up.
4
Enter the three-digit code of your device (see Appendix).
If the entered code is correct, the device will turn off.
5
Press the device button again. The button should blink twice and then turn off.
Scaning Mode
Use the scanning mode to scan through the list of codes for a particular device. This
could take some time because there might be many codes for the selected device.
1
Turn on the device you want to control.
2
Aim the remote control at the device.
3
Press the device button and the
should light up.
4
Repeatedly press the
The device button will blink each time you press the
5
When the device turns off, stop pressing the
6
Press the device button again. The button should blink twice and then turn off.
To operate a device using your remote control, first press the corresponding device
button ( ,
TV SAT
to work the particular components of your entertainment system.
19
our Remote Contr
our Remote Contr
or the
CH+
, , ). The
TV
VCR DVD
ol
ol
) and the button simultaneously.
SET
TV
button simultaneously. The device button
SET
button to scan through the device codes.
CH-
CH+ CH-
, , and buttons need to be programmed
DVD
VCR
or button.
CH+
CH-
buttons.