3.2.5 USB interface for advance programming
The V40-10HDMI provides a USB interface with the appropriate software for advanced programming. For more
information read Appendix A.
3.3 BLOCK DIAGRAM
3.4 FRONT PANEL
Figure 1. Front panel operating controls
1. Channel or Profile selection button
2. Seven Segment Display (SSD)
3. UP / DOWN buttons
4. LED indicators
a.
Lock:
b.
Channel:
c.
Attenuation:
d.
Channel:
5. Ground connector
6. +12 V DC power input
7. HDMI input
8. USB input
9. RF OUT output
ON when HDMI communication have been established
ON when "Channel" mode is selected
ON when "Attenuator" mode is selected
ON when "Profile" mode is selected