janitza UMG 96-PA Installation Manual

Janitza electronics GmbH Janitza electronics GmbH
Vor dem Polstück 6 Vor dem Polstück 6
D-35633 Lahnau D-35633 Lahnau
Support tel. +49 6441 9642-22 Support tel. +49 6441 9642-22
Fax +49 6441 9642-30 Fax +49 6441 9642-30
E-mail: info@janitza.de E-mail: info@janitza.de
www.janitza.com www.janitza.com
Safety
2 2
Safety
2 2
Safety information
Safety information
Damage to property due to Damage to property due to
The installation manual does not represent a full m m
The installation manual does not represent a full
disregard of the connection disregard of the connection
listing of all necessary safety measures required
listing of all necessary safety measures required
conditions or impermissible conditions or impermissible
for safe operation of the device.
for safe operation of the device.
CAUTION! CAUTION!
voltage swells voltage swells
Special operating conditions may require further
Special operating conditions may require further
measures. The installation manual contains
Your device can be damaged or destroyed Your device can be damaged or destroyed
measures. The installation manual contains
instructions that must be observed to ensure
by a failure to comply with the connection by a failure to comply with the connection
instructions that must be observed to ensure
your personal safety and to prevent damage to
conditions or by exceeding the permissible conditions or by exceeding the permissible
your personal safety and to prevent damage to
property.
voltage range. voltage range.
property.
Before connecting the device to the supply Before connecting the device to the supply
Symbols used:
voltage, please check: voltage, please check:
, Symbols used:
• Voltage and frequency correspond to the • Voltage and frequency correspond to the
c This symbol is an addition to the
c This symbol is an addition to the
details on the ratings plate! Adhere to details on the ratings plate! Adhere to
safety instructions and indicates
safety instructions and indicates
the threshold values as described in the the threshold values as described in the
an electrical hazard.
an electrical hazard.
user manual! user manual!
This symbol is an addition to the
m
This symbol is an addition to the
m
• In building installations, the supply • In building installations, the supply
safety instructions and indicates
safety instructions and indicates
voltage must be protected with a UL/IEC voltage must be protected with a UL/IEC
a potential hazard.
a potential hazard.
approved circuit breaker / a fuse! approved circuit breaker / a fuse!

 This symbol with the word NOTE!
• The circuit breaker • The circuit breaker
This symbol with the word NOTE!
describes:
- must be easily accessible for the user - must be easily accessible for the user
describes:
• Procedures that do not pose
and be installed close to the device. and be installed close to the device.
• Procedures that do not pose
any risks of injures.
- must be labelled for the relevant - must be labelled for the relevant
any risks of injures.
• Important information, proce-
device. device.
• Important information, proce-
dures or handling steps.
• Do not connect the supply voltage to the • Do not connect the supply voltage to the
dures or handling steps.
voltage transformers. voltage transformers.
Safety information is highlighted by a warning
• Provide a fuse for the neutral conductor • Provide a fuse for the neutral conductor
Safety information is highlighted by a warning
triangle and if the source's neutral conductor if the source's neutral conductor
triangle and
is indicated as follows depending on the degree connection is not earthed. connection is not earthed.
is indicated as follows depending on the degree
of danger:
of danger:
Power Analyser
Power Analyser
UMG 96-PA
UMG 96-PA
Installation manual
Installation manual
Installation Installation
 
Device settings Device settings
 
User manual:
c c
m
m
Risk of injury due to electric Risk of injury due to electric
Indicates an imminent danger that
Indicates an imminent danger that
voltage! voltage!
causes severe or fatal injuries.
causes severe or fatal injuries.
WARNING! WARNING!
DANGER!
DANGER!
Severe bodily injuries or death can occur due to: Severe bodily injuries or death can occur due to:
• touching bare or stripped wires that are live, • touching bare or stripped wires that are live,
m
Indicates a potentially hazardous
m
Indicates a potentially hazardous
• device inputs that are dangerous to touch. • device inputs that are dangerous to touch.
situation that can cause severe
situation that can cause severe
De-energise your device before starting De-energise your device before starting
injuries or death.
injuries or death.
WARNING!
work! Check that it is de-energised. work! Check that it is de-energised.
WARNING!
m
m
Indicates a potentially hazardous
Indicates a potentially hazardous
situation that can cause minor
situation that can cause minor
injuries or damage to property.
CAUTION!
injuries or damage to property.
CAUTION!
Safety measures
Safety measures
When operating electrical devices, certain parts
When operating electrical devices, certain parts
of these devices are invariably subjected to
of these devices are invariably subjected to
hazardous voltage. Therefore, severe bodily
hazardous voltage. Therefore, severe bodily
injuries or damage to property can occur if they
injuries or damage to property can occur if they
are not handled properly:
are not handled properly:
• Before connecting connections, earth the
• Before connecting connections, earth the
device at the ground wire connection if
device at the ground wire connection if
present.
present.
• Hazardous voltages may be present in all
• Hazardous voltages may be present in all
switching parts that are connected to the
switching parts that are connected to the
power supply.
power supply.
General General
1 1
Disclaimer Disclaimer
Observing the information products for Observing the information products for
the devices is the prerequisite for safe the devices is the prerequisite for safe
operation and in order to obtain the specifi ed operation and in order to obtain the specifi ed
performance and product features. Janitza performance and product features. Janitza
electronics GmbH accepts no liability for electronics GmbH accepts no liability for
injuries to personnel, property damage or injuries to personnel, property damage or
fi nancial losses arising due to a failure to fi nancial losses arising due to a failure to
comply with the information products. comply with the information products.
Ensure that your information products are Ensure that your information products are
legible and accessible. legible and accessible.
Further documentation is available on our Further documentation is available on our
website at www.janitza.com under website at www.janitza.com under
Support > Downloads. Support > Downloads.
User manual:
Copyright notice Copyright notice
© 2017 - Janitza electronics GmbH - Lahnau. © 2017 - Janitza electronics GmbH - Lahnau.
All rights reserved. Duplication, editing, All rights reserved. Duplication, editing,
dissemination and other utilisation, also in part, dissemination and other utilisation, also in part,
is prohibited. is prohibited.
Subject to technical changes. Subject to technical changes.
• Please ensure that your device complies • Please ensure that your device complies
with the installation manual. with the installation manual.
• Please read and understand the documents • Please read and understand the documents
enclosed with the product fi rst. enclosed with the product fi rst.
Network systems Network systems
5 5
• Hazardous voltages may also be present
• Hazardous voltages may also be present
in the device even after disconnecting the
in the device even after disconnecting the
Suitable network systems and maximum rated voltages (DIN EN 61010-1/A1): Suitable network systems and maximum rated voltages (DIN EN 61010-1/A1):
supply voltage (capacitor storage).
supply voltage (capacitor storage).
• Do not operate equipment with current
• Do not operate equipment with current
transformer circuits while open.
Three-phase four-wire systems Three-phase four-wire systems
transformer circuits while open.
with earthed neutral conductor with earthed neutral conductor
• Do not exceed the threshold values specifi ed
• Do not exceed the threshold values specifi ed
in the user manual and on the rating plate!
in the user manual and on the rating plate!
Also adhere to this during inspection and
Also adhere to this during inspection and
commissioning!
commissioning!
• Observe the safety and warning instructions in
• Observe the safety and warning instructions in
the documents that belong to the device!
the documents that belong to the device!
Qualifi ed staff
Qualifi ed staff
In order to prevent personal injuries and damage E
In order to prevent personal injuries and damage
to property, only qualifi ed staff with electrical
to property, only qualifi ed staff with electrical
IEC U IEC U / U
L-N
training may work on the device, with knowledge
training may work on the device, with knowledge
of
UL of U UL / U U
L-N
• the national accident prevention regulations
• the national accident prevention regulations
• the safety engineering standards
• the safety engineering standards
• installing, commissioning and operating the
• installing, commissioning and operating the
device.
device.
E
7 / 12
• Keep the documents enclosed with the
product available throughout the entire
service life of the product and pass them
on to subsequent users if applicable.
• Inform yourself of any device revisions
and the associated updates to the
documentation enclosed with the product
at www.janitza.com.
Disposal
Observe the national regulations! If necessary,
dispose of individual parts according to their
properties and existing country-specifi c
regulations, e.g. as:
• Electronic waste
• Plastics
• Metals
or commission a certifi ed disposal company
with scrapping.
Relevant laws,
applied standards and directives
For information on the laws, standards and
directives that Janitza electronics GmbH has
applied for the device, see the declaration of
conformity on our website (www.janitza.de).
Proper use
Proper use
The device is
The device is
• intended to be installed in switching cabinets
• intended to be installed in switching cabinets
and small installation distributors. It can be
installed in any installation position (please
observe step 3 "Assembly").
L1 L1 L1 L1
• not intended for installation in vehicles!
• not intended for installation in vehicles!
L2 L2 L2 L2
The use of the device in mobile equipment
is considered to be non-standard
N N N N
environmental conditions and is therefore
only permitted after separate agreement.
R R • not intended for installation in environments
• not intended for installation in environments
with hazardous oils, acids, gases, vapours,
L3 L3 L3 L3
E E E E E E dusts, radiation, etc. E E
The device can be used in The device can be used in
417 V / U 417 V / 720 V / 720 V
LN LN LL LL
L-L: L-N L-L: • TN and TT networks • TN and TT networks
The prerequisites of faultless, safe operation
The prerequisites of faultless, safe operation
• domestic and industrial areas. • domestic and industrial areas.
of this device are proper transport and proper
347 V / U 347 V / 600 V / 600 V of this device are proper transport and proper
LN LN LL LL
L-L: L-N L-L:
storage, set-up, installation, operation and
storage, set-up, installation, operation and
L1 L1 L L
maintenance.
maintenance.
L2 L2 N N
E E E E E E E E
• Keep the documents enclosed with the
product available throughout the entire
service life of the product and pass them
on to subsequent users if applicable.
• Inform yourself of any device revisions
and the associated updates to the
documentation enclosed with the product
at www.janitza.com.
Disposal
Observe the national regulations! If necessary,
dispose of individual parts according to their
properties and existing country-specifi c
regulations, e.g. as:
• Electronic waste
• Plastics
• Metals
or commission a certifi ed disposal company
with scrapping.
Relevant laws,
applied standards and directives
For information on the laws, standards and
directives that Janitza electronics GmbH has
applied for the device, see the declaration of
conformity on our website (www.janitza.de).
and small installation distributors. It can be
installed in any installation position (please
observe step 3 "Assembly").
L1 L1 L1 L1
The use of the device in mobile equipment
is considered to be non-standard
environmental conditions and is therefore
only permitted after separate agreement.
L2 L2 L2 L2
L3 L3 L3 L3
with hazardous oils, acids, gases, vapours,
E E E E E E E
dusts, radiation, etc.
L1 L1
N N
L2 L2
E E E
2 2
3
6