When A Menu Screen Appears On The Television; Position Memory; Using The Direct Navigator; To Erase A Program That Is Being Played Back - Samsung DVD-R4000 Operating Instructions Manual

When a menu screen appears on the
television
[VCD]
Switch [DVD, TV] to "DVD" and
Press the numbered buttons (0, 1j9) to select an item.
e.g., "5": [0] [5]
"15": [1] [5]
[DVD-V]
Press [3, 4, 2, 1] to select an item and press
[ENTER].
≥You may also be able to use the numbered buttons (0, 1j9) to
select an item.
Other buttons used to operate menus
Read the disc's instructions for further details about operation.
[17 ] [5/ 17 ]: Shows the next menu.
[82 ] [82 /22 ]: Shows the previous menu.
[RETURN]: Shows the menu screen.
[TOP MENU]: Shows the first menu screen. [DVD-V]
[MENU]: Shows the menu screen. [DVD-V]
[Note]
≥Discs continue to rotate while menus are displayed. Press [∫]
when you have finished viewing to preserve the unit's motor and
your television screen.
" appears on the television, the operation is prohibited by
≥If "
the unit or disc.
≥Functions available vary from disc to disc.

Position Memory

[RAM] [DVD-R] [DVD-V] [VCD] [CD] [MP3]
You can start play from a memorized position even after turning the
unit off.
(When the elapsed play time is displayed)
1
During play
Press [POSITION MEMORY].
The message "Position Memorized" appears on the
television.
2
After switching the unit to standby and back on
Press [1] (PLAY).
Play starts from the memorized position. (The position is
cleared.)
[Note]
[DVD-R] [DVD-V] [VCD] [CD] [MP3]
≥The position is cleared when you open the disc tray.
[RAM]
≥Positions remain memorized even after the disc tray is opened.
≥You cannot mark positions if the disc is write-protected.
For your reference
If you press [∫] before switching the unit to standby after pressing
[POSITION MEMORY] to memorize a position, play will resume
from the position you pressed [∫] when you press [1] (PLAY).
[VCD]

Using the Direct Navigator

[RAM] [DVD-R]
A list of programs is created as you record them. You can use this
list to find programs to watch.
1
Press [DIRECT NAVIGATOR].
The highlighted program plays in the background.
2
Press [3, 4] to select the program
and press [ENTER].
≥You can also select programs with the numbered buttons.
e.g., "5": [0] [5]
"15": [1] [5]
Play of the images that were playing in the background
continues.
To stop play
Press [∫].
To clear the program list
Press [DIRECT NAVIGATOR].
About the program list
Write-protected
Displayed when you have protected
the program.
Copy-protected
Displayed when you have recorded
a program that has copy protection,
from CATV broadcasts, for example.
Unable to play
Displayed if you cannot play the program.
Currently recording
Displayed when the program is being
recorded.

To erase a program that is being played back

Since the program and any play lists ( page 28) created
from it are erased irretrievably by this procedure, you
should be certain you wish to erase before carrying it out.
1
Press [ERASE].
A confirmation screen will be displayed.
2
Press [2] to select "Erase" and press
[ENTER].
≥On the main unit, press [82 /6] and [ERASE].
[Note]
≥It is not possible to erase the program when you are carrying out
simultaneous rec and play ( page 22). [RAM]
≥The amount of space remaining on the disc does not increase
even if you erase programs. [DVD-R]
≥If the confirmation screen disappears before you complete the
operation, start from the beginning again.
DIRECT NAVIGATOR
No CH DATE TIME TITLE EDIT
3
6/20 WED 10 : 00 AM Dinosaur 1
01 4
1
02 6 6/20 WED 9 : 00 PM Auto action
1
03 13 6/20 WED 11 : 00 PM USJ
1
1
3
TOTAL 3 No SELECT
0 ~ 9
RETURN
ENTER
N o
POS FE
3
01 4 6/20
6/20
02 6
03 13 6/20
X
6/21
04 2
¥
05 8 6/22
3
TOTAL 5
N
0 ~
17
DVD-R4000