Skil ME981901 Owner's Manual page 15

Change The Measure Mode
Press the UP or Down Arrow Button to scroll through the following
modes:
Single-distance measurement
•
Area measurement
•
Real-time measurement
•
Indirect measurement
•
Digital leveling
•
Change the Unit of Measure (Single-Distance, Area,
Real Time, and Indirect Measurement)
Option 1
Main Button
NOTE: The tool defaults to feet and inches before the first use.
Press and hold the Main Button to turn on the tool. Continue holding
for more than 2 seconds until the desired unit of measurement
(feet/inch or meters) is displayed on the screen (FIG. 3). When the
desired unit of measurement
Main Button. After releasing the button, the tool turns itself on and
subsequent measurements will be displayed in the selected unit.
Fig. 3
M O D E
appears on the screen, release the
Distance
m
M O D E Distance
15