Rear Panel - Samsung 00956L Instruction Manual

Rear Panel

1 AUDIO OUT
Connect to the Audio input jacks of your
television.
2 COMPONENT VIDEO OUT
- Use these jacks if you have a TV with
Component Video in jacks.
These jacks provide P
- If Component (Progressive Scan) Video Output
is selected in the Alt Video Out menu or by
using the P.SCAN button on the front panel,
progressive scan mode will be enabled.
- If Component (Interlace Scan) Video Output is
selected in the Alt Video Out menu or by using
the P.SCAN button on the front panel,
interlaced scan mode will be enabled.
3. HDMI OUT JACK
- Use the HDMI cable to connect this jack to
the HDMI jack on your television for the best
quality picture.
- If an HDMI cable is connected to an HDMI-
compatible TV, HDMI will be output
automatically within 10 seconds.
- If you want to use a Video, S-Video or
Component Output, unplug HDMI cable.
DVD/VCR Output Chart
Type of Connection
S-VIDEO OUT
COMPONENT VIDEO OUT
AUDIO OUT (L,R)
DIGITAL AUDIO OUT (COAXIAL)
LINE OUT (A/V)
RF OUT
HDMI OUT
Notes
Consult your TV User's Manual to find out if your TV supports Progressive Scan. If Progressive Scan is
■
supported, follow the TV User's Manual regarding Progressive Scan settings in the TV's menu system.
If Component (Progressive Scan) Output is selected in Alt Video Out menu, Video and S-Video will not work.
■
See pages 63 ~ 64 to get more information on how to use the Alt Video Out menu.
■
S
E T U P
, P and Y video.
R B
DVD Output Jacks VCR Output Jacks
O
O
O
O
O
O
O
¨ ¨ ˆ ˆ
Ø Ø
4 RF IN (FROM ANT.)
Connect the RF Antenna cable to your DVD-
VCR.
5 RF OUT (TO TV)
Connect your DVD-VCR to a TV
6 LINE OUT (VIDEO/AUDIO)
Use a Video/Audio cables to connect to the
Video/Audio input jacks on your television.
7 LINE IN 1 (VIDEO/AUDIO)
Connect to the Video/Audio output jack of your
external device.
8 DIGITAL AUDIO OUT (OPTICAL/COAXIAL)
- Use either an optical or coaxial digital audio
cable to connect to a compatible Dolby Digital
receiver.
- Use either an optical or coaxial digital audio
cable to connect to an A/V Amplifier that
contains a Dolby Digital, MPEG2 or DTS
decoder.
9 S-VIDEO OUT
Use the S-Video cable to connect this jack to the
S-Video input jack on your television for higher
picture quality.
X
X
X
X
O
O
X
ENG-11
Œ Œ ´ ´
ˇ ˇ
' '
" "
∏ ∏
O : Active.
X : Inactive.