Advertisement
Quick Links
A
NTENNA
SPECIFICATIONS
Working Environment
XTT901, XTT906, XTT908 .....
XTT902, XTT903, XTT904,
XTT907 ..................................
XTT905 ..................................
XTT909 ..................................
XTT950 ..................................
Buzzer
Volume and Tone ...................
Keypad
XTT904 and XTT907 ..............
XTT905 ..................................
Status Indicators
Status LED .............................
ImproX 125 kHz Antenna Readers
INSTALLATION MANUAL
MODEL NUMBER: XTT901-1-0-GB-XX XTT902-1-0-GB-XX
XTT903-1-0-GB-XX XTT904-1-0-GB-XX
XTT905-1-0-GB-XX XTT906-1-0-GB-XX
XTT907-1-0-GB-XX XTT908-1-0-GB-XX
XTT909-1-0-GB-XX XTT950-1-0-GB-XX
R
EADERS
Designed to work in an indoor or outdoor
environment similar to IP66. The Antenna
Readers are, therefore, sealed (potted) against
water.
Designed to work in an indoor or outdoor
environment similar to IP53. The Antenna
Readers are, therefore, sealed (potted) against
water.
Designed to work in an indoor or protected
outdoor environment similar to IP42. The
Antenna Reader is, therefore, not sealed
against water.
The IP rating for this Antenna Reader is
equivalent to the selected Cabinet's rating.
Designed to work in an indoor or protected
outdoor environment similar to IP54.
NOTE:
Certain plastic Readers (XTT901,
XTT902, XTT905, XTT907 and
XTT908) are RoHS compliant and
do not contain any UV stabilizer.
Single tone, 4-step adjustable volume.
NOTE:
The ImproX MMA (XTT901) does
not include a buzzer.
12 Alphanumeric keys.
12 Numeric keys.
Bi-coloured Red or Green (externally visible).
Advertisement
Related Manuals for impro technologies XTT901-1-0-GB-00
Summary of Contents for impro technologies XTT901-1-0-GB-00
-
Page 1: Specifications
MODEL NUMBER: XTT901-1-0-GB-XX XTT902-1-0-GB-XX XTT903-1-0-GB-XX XTT904-1-0-GB-XX XTT905-1-0-GB-XX XTT906-1-0-GB-XX XTT907-1-0-GB-XX XTT908-1-0-GB-XX XTT909-1-0-GB-XX XTT950-1-0-GB-XX NTENNA EADERS ImproX 125 kHz Antenna Readers INSTALLATION MANUAL SPECIFICATIONS Working Environment XTT901, XTT906, XTT908 ..Designed to work in an indoor or outdoor environment similar to IP66. The Antenna Readers are, therefore, sealed (potted) against water. -
Page 2: Installation Information
INSTALLATION INFORMATION Accessories Find the following when unpacking the Antenna Reader: XTT901 to XTT904 and XTT907 Either an ImproX MMA Antenna Reader (XTT901-1-0-GB-XX) housed in a Dark Grey, ABS Plastic housing. The ImproX MMA consists of a Front Cover and a Backing Plate. - Page 3 XTT909 Ten ImproX CA Antenna Reader printed circuit board assemblies. An extra Serial Number Label. XTT950 An ImproX Antenna Junction Box Reader housed in a Black, ABS Plastic housing. The Antenna Reader consists of a Front Cover and a Backing Plate Assembly (the Front Cover is attached with a Combi Screw (6 mm x 2.2 mm)).
- Page 4 CAUTION: Once clipped together, separation of the Backing Plate and Front Cover of the ImproX MMA (XTT901) is likely to cause damage to the Antenna Reader. Select the mounting position of the Antenna Reader, considering accessibility, routing of wires and visibility of the externally visible LED. XTT901 to XTT905, XTT907, XTT908 and XTT950 Secure the Antenna Reader to the mounting surface, using two suitable screws and wall plugs, nuts and bolts, rivets or double-sided adhesive tape.
- Page 5 XTT909 WARNING: DO NOT MOUNT THE IMPROX CA IN THE SAME ELECTRICAL JUNCTION BOX AS THE MAINS ELECTRICAL SUPPLY. Figure 2: Electrical Conduit Blanking Plate Options The ImproX CA is approved for use with the following Electrical Conduit Blanking Plates (specific to the European Market): ...
- Page 6 Connecting the ImproX Antenna Readers Figure 3 to Figure 8 show detailed connection diagrams for the Antenna Readers: Figure 3: ImproX Antenna Reader Connected to the IXP220 Controller XTT301-0-0-GB-15 December 2010 Page 6...
- Page 7 Figure 4: ImproX Antenna Reader Connected to the IXP20 Controller XTT301-0-0-GB-15 December 2010 Page 7...
- Page 8 Figure 5: ImproX Antenna Reader Connected to the ImproX iTT XTT301-0-0-GB-15 December 2010 Page 8...
- Page 9 Figure 6: ImproX Antenna Reader Connected to the SupaGate Receiver XTT301-0-0-GB-15 December 2010 Page 9...
- Page 10 Figure 7: ImproX Antenna Reader Connected to the ImproX MfT XTT301-0-0-GB-15 December 2010 Page 10...
- Page 11 Figure 8: ImproX Antenna Reader Connected to the IXP110 Controller XTT301-0-0-GB-15 December 2010 Page 11...
-
Page 12: Guarantee Or Warranty
GUARANTEE OR WARRANTY This product conforms to our Guarantee or Warranty details placed on our Web Site, to read further please go to www.impro.net. This manual applies to the ImproX 125 kHz Antenna Readers, XTT901-1-0-GB-00, XTT902-1-0-GB-01, XTT903-1-0-GB-00, XTT904-1-0-GB-03, XTT905-1-0-GB-01, XTT906-1-0-GB-00, XTT907-1-0-GB-01, XTT908-1-0-GB-01, XTT909-1-0-GB-00 and XTT950-1-0-GB-01.