Special Vcr Playback Features; S-Vhs Playback; Variable Search System - Samsung VR330S Instruction Manual

Special VCR Playback
Features
While a videotape is playing, you can enjoy a variety of
special playback features, including Still, Frame Advance,
Skip, Slow motion, and more.
Pause
In Play mode, press √ II
a single frame.
Frame Advance
In Pause mode, press F.ADV/SKIP button to
advance to the next frame.
Fps/Review
In Play mode, press Forward (√√)button or Rewind
(œœ)button to Fps/review at two speeds:
• Picture Search - Press and release repeatedly to
advance the tape forward or backward at 2,3,5,7
times normal speed.
• Jet Search - Press and hold to advance the tape
forward or backward at 7 times normal speed.
Skip
In Play mode, press F.ADV/SKIP button to cue
ahead exactly 30 seconds. Press F.ADV/SKIP button
repeatedly up to 4 times to cue ahead 2 minutes.
Slow motion
In Pause mode, press √√ button for slow motion.
Press the √√ button repeatedly to vary slow motion
speed from 1/5 to 1/30 of normal playback. Press
the PLAY button twice to resume normal viewing.

S-VHS Playback

The DVD Recorder & VCR allows you to playback high
quality S-VHS tapes.
Insert an S-VHS tape into the VCR deck.
1
Press √
II
2 (PLAY/PAUSE) button on the remote
control or on the front panel to play a S-VHS tape.
(PLAY/PAUSE)button to still
Variable Search
System
Each time you record a cassette on this DVD Recorder
& VCR, an "index" is automatically marked on the tape
when recording is started. The Search function allows
you to fast-forward or rewind to a specific index and
start playback from that point. Depending on the direc-
tion selected, the indexes are numbered as follows
• This DVD Recorder & VCR uses a standard indexing
system (VISS). As a result, it will recognize any index-
es marked by other VCRs using the same system and
vice versa.
Go To Zero
Use this feature when you want to search for the
0:00:00 counter position on a cassette.
1 Press the CANCEL button at the point on the tape
where you want to set the counter to 0:00:00.
2 While a cassette is stopped, press the ANYKEY
button.
VCR
Go To Zero
End Search
Forward Intro Scan
Reverse Intro Scan
MOVE SELECT
Press the ...† buttons to select Go To Zero, then
3
press the ENTER button.
The VCR will rewind or fast forward, searching for
the 0:00:00 counter position, and then automati-
cally stop at that position.
Go To Zero
➛ ➛
00:00:49
English - 57