Setting Up The Display(Video) Options; Setting Up The Display (Video) Options - Samsung DVD-VR329 Instruction Manual

Setting Up the
Display(Video) Options
This function allows you to setup the TV screen
settings.
With the unit in Stop mode/No Disc mode, press
1
the MENU button.
Press the ...† buttons to select Setup, then press
2
the ENTER or √ button.
DVD-Recorder
No Disc
Timer Rec.
System
Clock Set
Setup
Channel Set
Language
Audio
Video
Parental Control
MOVE ENTER
Press the ...† buttons to select Video, then press
3
the ENTER or √ button.
Video option menu will be displayed.
DVD-Recorder
No Disc
Timer Rec. TV Aspect
Setup Input Level
Black Level
3D Noise Reduction : Off
MOVE ENTER
Press the ...† buttons to select the desired video
4
option, then press the ENTER or √ button.
Press the ...† buttons to select the desired item,
5
then press the ENTER or √ button.
Press the RETURN or œ button to return to the
previous menu.
Note
Press the MENU button to exit the menu.
36 - English
Setup
√ √
√ √
√ √
√ √
√ √
√ √
√ √
RETURN EXIT
Video
: 16:9 Wide
√ √
: Darker
√ √
: 7.5 IRE
√ √
√ √
RETURN EXIT
TV Aspect
Depending on the type of television you have, you
may want to adjust the screen setting. (aspect ratio)
• 4:3 Letter Box : Select when you want to see the
total 16:9 ratio screen DVD sup-
plies, even though you have a TV
with a 4:3 ratio screen. Black
bars will appear at the top and
bottom of the screen.
• 4:3 Pan & Scan : Select this for a conventional
size TV when you want to see
the central portion of the 16:9
screen. (Extreme left and right
side of movie picture will be cut
off.)
• 16:9 Wide : You can view the full 16:9 picture on
your wide-screen TV.
Input Level
Adjusts the level of the input signal.
If you feel the screen is too light
• Darker :
and you want to make the screen
darker.
If you feel the screen is too dark
• Lighter :
and you want to make the screen
lighter.
Black Level
Adjusts the black level of the screen.
• 7.5 IRE : This will enhance the black level for
increased brightness/contrast when
viewing DVDs.
Select this when you want to make the
screen lighter.
• 0 IRE : This is the standard NTSC reference black
level for consistent brightness/contrast
across all sources.
Select this when you want to make the
screen darker.
3D Noise Reduction
• Off : Normal
• On : Select to remove noise from the screen.
This function depends on disc type. It may
not work for some disc types.
Note
IRE: Short for the Institute of Radio
Engineers. An IRE unit is a relative unit
of measure equaling 1/140th of the
peak-to peak (p-p) video amplitude.
Black level function is not available in the
progressive scan mode.