Audio Interface; Adc Interface; Mobileanlayser Sw Interface - Fibocom G600 User Manual

4.6 Audio Interface

There are three kinds of audio interface. As following picture
Hand-free SPK
The hand-free audio and the second audio are connect to the same audio interface of G600. So
you cannot use the second audio interface RJ11 and hand-free interface at the same time.
Development board
JA3

4.7 ADC Interface

Development board JP7（3pin/4pin）will connected to ADC1 and ADC2（80pin only）. You can
inquire about the voltage after ADC transfer through AT command.
Important:

4.8 MobileAnlayser SW Interface

There is a debug interface inside development board. It will be used to analyze and debug the
H330 HSPA+ Module Development Kit User Manual
of 25
The second audio interface
SPK-/MIC-/MIC+/SPK+
JA3(1-2pin)
JA3(3-4pin)
JA3(5-6pin)
Please move off RP10/RP11/RP12/RP13 when you test outside voltage.
Hand-free MIC-/MIC+
RJ11
Description
Turn on/ off AUXO+ to hand-free interface
Turn on/ off PA power supply hand-free interface
Turn on/ off AUXO+ to hand-free interface
RJ11
The first audio interface
SPK-/MIC-/MIC+/SPK+
Page 14