Tuner Band Setting; Rf Output Channel - Samsung DVD-V9090 Instruction Manual

Tuner Band Setting

This feature allows you to manually set the DVD-VCR's
tuner band to Antenna or Cable, whichever you
connected to the Antenna In jack during initial setup.
• Use this setting only if Auto Setup detected the
incorrect tuner band, i.e. channels are coming in on
the wrong channel numbers.
1 Open "MENU"
With the DVD in Stop or Play mode, press the
MENU button.
2 Select "SETUP"
Using the UP/DOWN buttons, move the selection
bar to "SETUP" then press ENTER to select.
3 Select "Channel"
Using the UP/DOWN buttons, move the selection
bar to "Channel", then press ENTER to select.
Language : English
Front Display : Auto
Auto Power Off : Off
4 Select "Ant./Cable"
Move the selection arrow to "Ant./Cable" then press
RIGHT button to select from the following options:
• Antenna - Indicates that the DVD-VCR is
connected to an indoor or outdoor VHF/UHF
antenna.
• Cable TV - Indicates that the DVD-VCR is
connected to Cable TV.
Ant./Cable : Antenna
RF Output CH : 3CH
Auto Channel Memory
Channel Add/Delete
1 Open "MENU"
2 Select "SETUP"
3 Select "Channel"
4 Select "RF Output CH"
5 Change "RF Output CH"
Cable TV
Antenna
6 Change "TV Channel"
ENG-13

RF Output Channel

With the DVD in Stop or Play mode, press the
MENU button.
Using the UP/DOWN buttons, move the selection
bar to "Setup" then press ENTER to select.
Using the UP/DOWN buttons, move the selection
bar to "Channel," then press ENTER to select.
Language : English
Front Display : Auto
Auto Power Off : Off
Move the selection bar to "RF Output CH", then
press right to change.
Ant./Cable : Antenna
RF Output CH : 4CH
Auto Channel Memory
Channel Add/Delete
A message will appear on your TV.
Then press ENTER to change.
A message will appear on your TV. When the
message disappears, change your TV to channel 3
or 4 to match the RF output channel of the player.
3CH
4CH