Special Playback Features; A/V Receiver Connections - Samsung DVD-V642K Instruction Manual

Special Playback Features

During DVD/CD playback you can select from the
following special playback options. To resume normal
playback, press the ❿
button.
ll
1 Still
Press the ❿
button on the remote control during
ll
playback.
• The picture will still and the audio will mute.
• To resume playback, press the ❿
• If the player is left in Still mode for 5 minutes, it
will stop automatically.
2 Frame Advance (Step)
While in playback mode, press the F.ADV/STEP
button on the remote control to advance one frame
at a time.
• Audio is muted during Frame Advance mode.
• Press ❿
to resume normal playback.
ll
NOTE: Frame Advance operates only in the forward
direction.
3 Skip Forward/Back
While a CD or DVD disc is in Play mode, press the
Skip l➛➛ / ❿ ❿l buttons on the remote control or
front panel to jump forward and backward through
disc chapters/tracks.
• Skip Forward will jump to the next chapter/track.
• Skip Back will jump to the beginning of the current
chapter/track.
• Press Skip Back again to jump to the beginning of
the previous chapter/track.
Search Forward/Back
While a disc is in Play mode, press and hold the ➛➛
/ ❿ ❿ buttons on the remote control or front panel to
visually search forward/backward at 2X - 4X - 8X -
16X - 32X - 128X speed. Press ❿
resume normal speed.
4 Slow Motion
During playback, press the ❿
image. Then use the Search ❿ ❿ to play in slow
motion at variable speeds.
• Each press increases the slow motion speed
playback to 1/8, 1/4 or 1/2 normal speed.
• Audio is muted during slow motion playback.
5 Stop/Resume
• Press the Stop button once to stop playback.
To resume the DVD/CD from the point where the
disc stopped, press the ❿
• Press the button twice to completely stop
playback. The next time you press ❿
start over from the beginning.
button.
ll
button to
ll
button to Still the
ll
button.
ll
, the disc will
ll
ENG-22

A/V Receiver Connections

To take full advantage of the movie theater experience
that DVD offers, you may want to connect your DVD-
VCR to a complete Surround Sound system, including
an A/V Receiver and six Surround Sound speakers.
Before You Begin...
• If your A/V receiver is equipped with a Dolby
Digital Decoder, you have the option to bypass the
DVD-VCR's built-in Dolby Digital Decoder. Use the
Digital Audio Out connection below.
(DVD-V645K)
O R
To Digital Audio Input of an A/V
Receiver with a Dolby Digital Decoder
(DVD-V642K)
O R
To Digital Audio Input of an A/V
Receiver with a Dolby Digital Decoder
1 Digital Audio Out
Connect EITHER an optical cable OR a digital
coaxial cable from the Digital Audio Out jacks on the
back panel of the DVD-VCR to their corresponding
Digital Audio Input jacks on your A/V Receiver:
• Optical
• Coaxial
• Use whichever connection is available on your
A/V Receiver.