Advertisement
Advertisement
Table of Contents
Related Manuals for Genexis Pulse
Summary of Contents for Genexis Pulse
- Page 1 Pulse WiFi Repeater/Extender Quick Installation Guide...
- Page 2 Router range Pulse placement The Pulse can be used in two different The Pulse can be placed on a desk or setups: either you can connect via an mounted on a wall. Ethernet cable or via a wireless connection to your router.
- Page 3 • Automatically via WPS pairing 3. Turn on your Pulse • Manually via your web browser Turn on your Pulse by fl ipping the switch on the side of the device. After approximately 1.5 minutes the Status LED should turn green and stop blinking.
- Page 4 LED on your Pulse should turn yellow and the WPS LED should turn off. › Your Pulse is now synchronized with your home network. If the internet LED turns red or off, retry to initiate WPS pairing on your Pulse and on your router.
- Page 5 Confi gure network settings Consult the information label at the bottom You will now be presented with the screen of your Pulse. It shows the SSID of the WiFi above. From that screen, select your home network (i.e. Genexis-xxxx). Connect to this network and fi...
- Page 6 Pulse can only be reached by connecting to connect one side of an Ethernet cable to the your home network. Continue with the steps WAN port of your Pulse and to one of the described by “Login to your Pulse settings LAN ports of your router.
Need help?
Do you have a question about the Pulse and is the answer not in the manual?
Questions and answers