Table of Contents
Advertisement
Quick Links
43 PC. VARIABLE SPEED ROTARY TOOL
Item Number W50031
OWNER'S MANUAL
WARNING
It is the owner and/or operators' responsibility to study all WARNINGS, operating, and maintenance
instructions contained on the product label and instruction manual prior to operation of this product. The
owner/operator shall retain product instructions for future reference.
The owner and/or operator are responsible for maintenance, maintaining all decals or warning labels and
while in use, maintaining the unit in good working order. If the owner and/or operator are not fluent in English,
the product warnings and instructions shall be read and discussed with the operators' native language by the
purchaser/owner or his designee. Make sure that the operator comprehends its contents. Safety information
shall be emphasized and understood prior to usage. The product shall be inspected per the operating
instructions.
Users of this product must fully understand these instructions. Each person operating this product must also
be of sound mind and body and must not be under the influence of any substance that might impair their
vision, dexterity or judgment.
Protect yourself and others by observing all safety information.
Failure to comply with instructions could result in personal injury and/or property damage!
If you encounter any problems or difficulties, please contact our customer service department at:
1-800-426-1262 between 6:30 a.m. and 4:30 p.m. Pacific time.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Performance Tool W50031
Summary of Contents for Performance Tool W50031
- Page 1 43 PC. VARIABLE SPEED ROTARY TOOL Item Number W50031 OWNER’S MANUAL WARNING It is the owner and/or operators’ responsibility to study all WARNINGS, operating, and maintenance instructions contained on the product label and instruction manual prior to operation of this product. The owner/operator shall retain product instructions for future reference.
-
Page 2: Safety Guidelines - Definitions
SAFETY GUIDELINES / DEFINITIONS This instruction manual is intended for your benefit. Please read and follow the safety, installation, maintenance and troubleshooting steps described within to ensure your safety and satisfaction. The contents of this instruction manual are based upon the latest product information available at the time of publication. The manufacturer reserves the right to make product changes at any time without notice. -
Page 3: Important Safety Information
IMPORTANT SAFETY INFORMATION common sense when operating this product. Do refrigerators. There is an increased risk of elec- not use this product while tired or under the influ- tric shock if your body is earthed or grounded. ence of drugs, alcohol, or medication. A moment 14. - Page 4 IMPORTANT SAFETY INFORMATION hold it in your hand or across your legs. Un- 35. Do not use a wheel that may be damaged. If stable support can cause loss of control and the tool or wheel is dropped, install a new wheel injury.
-
Page 5: Controls And Components
CONTROLS AND COMPONENTS 1. On/off Switch 2. Shaft Lock Button 3. Collet 4. Cord 5. Brushes 6. Speed Control Dial SYMBOL DEFINITIONS IMPORTANT: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. Symbol Name Explanation... -
Page 6: Care And Maintenance
CARE & MAINTENANCE ventilation openings clear. WARNING Always UNPLUG the Rotary Tool from the power source before in- Brushes will wear with use and should specting, performing any maintenance or be inspected periodically by qualified cleaning. personnel. NOTICE This Rotary Tool is lubricated Regularly clean the ventilation slots in before it leaves the factory. - Page 7 ACCESSORIES Use only accessories that are recommended by plug. The plug must be plugged into an the manufacturer for your model. Accessories outlet that is properly installed and grounded in accordance with all local codes and that may be suitable for one tool may become hazardous when used on another tool.
- Page 8 ACCESSORIES BALANCING For best results, be sure to balance each accessory in the collet. Your tool’s high RPM makes imbalances easily detectable as a wobble while the tool is running. To balance an accessory: 1. Stop the tool. 5. Run the tool. 2.
-
Page 9: Drill Bits
ACCESSORIES charring (wood), melting (plastic), or WARNING NEVER RUN BRUSHES discoloration (metal). Aluminum oxide AT SPEEDS ABOVE 15,000 RPM. The (red) accessories are best for wood, brush could eject bristles at high speed which could become embedded in your metals, and plastics, while silicon skin or which could cause other serious carbide (blue) accessories are best for injury. - Page 10 ACCESSORIES Screw shanks Screw shanks are used for mounting cutting wheels. Threaded-tip shanks Threaded-tip shanks are used for felt polishing wheels. Shanks with a long threaded tip are used for pointed Sanding band shanks polishing wheels while shanks with short threaded tips are used for round Sanding band shanks feature an felt polishing wheels.
- Page 12 90 days from the date of purchase, provided that product is returned to place of purchase immediately after discovery of defect. After 90 days and up to one year from date of purchase, PERFORMANCE TOOL® will replace at no charge any parts which our examination shall disclose to be defective and under warranty.
Need help?
Do you have a question about the W50031 and is the answer not in the manual?
Questions and answers