Pearl Malletstation EM1 User Manual page 7

KMI EXPANDER PORT
This port is reserved for use with Keith McMillen Instruments'
MIDI Expander. (See page 10)
NOTE: this is NOT a standard USB connection, and cannot be used
for connection to a computer.
USB PORT
This port is used to connect the malletSTATION to your
computer or mobile device, and transmits both power and
MIDI information.
GETTING STARTED (continued)
KEY FEATURES - JACK PANEL
3 ASSIGNABLE PEDAL INPUTS
By default, the 3 assignable pedal inputs will be set to the
following commands*:
Expression - Expression (cc11)
Switch - Assignable in software (cc21)
Sustain - Internal Sustain (will not send cc64 by default)
The sustain and switch jacks can accept a standard piano-
style sustain pedal, and the expression jack requires a
continuous control pedal (expression pedal).
*These assignments can be easily changed in the software editor.
NOTE: The polarity of the sustain pedal sometimes needs to be
switched due to differing implementation standards. If you notice
that when your pedal is in the up position that the notes are
ringing, reverse the switch on your pedal.
7