Choosing A Connection - Samsung DVD-HD945/ User Manual

Choosing a Connection

The following shows examples of connections commonly used to connect the DVD player with a TV
and other components.
Before Connecting the DVD Player
• Always turn off the DVD player, TV, and other components before you connect or disconnect any cables.
• If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input.
• Refer to the owner's manual of the additional components you are connecting for more information on those
particular components.
Connection to an Audio System
Method 1
AUDIO
SYSTEM
5.1ch Analog Amplifier
2ch Amplifier
Audio Input Jacks
DVD
Player
Audio Output Jaks 5.1CH Analog Audio Output Jacks
(2 Channel)
Note
• DVD-AUDIO only plays back two channel audio through the Digital Audio out. Multi-channel DVD-Audio discs
are output through the Analog outputs.
• Super Audio CD plays back only through the Analog outputs. (See page 33~34)
Method 2 Method 3
Dolby Digital Decoder
Audio Input Jacks
Digital Audio Input Jack
Digital Audio Output Jack
(Multi Channel)
ENG-10
Choosing a Connection
Connection to a TV (For Video)
TV (Normal, Widescreen, Projection, etc..)
Basic Audio
TV
DVD
Player
Audio Output
Jacks
1. Connect a cable with the desired method.
2. Turn on your TV and DVD Player.
3. Set your TV the correct video input by pressing TV/VIDEO button on. (See page 39)
4. Select the video output according to the cable connection.
If you use the VIDEO SEL. button, you can change easily video output in no disc mode.
OR
Method 1
DVD Player + TV with Video Input Jack
(The Video Output in Setup Menu must be set to S-Video, SCART or Component (Iscan).)
Method 2
DVD Player + TV with S-Video Input Jack
(The Video Output in Setup Menu must be set to S-Video.)
Method 3
DVD Player + TV with Scart Input Jacks (Audio & Video)
(The Video Output in Setup Menu must be set to SCART Output.)
Method 4
DVD Player + TV with Component Video Jacks
(The Video Output in Setup Menu must be set to Component (Iscan).)
Note
• If you press the VIDEO SEL. button, Video output mode is changed in regular sequence in no disc mode.
(S-Video Iscan
Method 1 Method 2 Method 3
Video S-Video SCART Jack
Scart
S-Video Cables
AV
(not
Cable Cable
supplied)
OR OR
Video Output S-Video Jack SCART Jack
Jack
Pscan & HDMI SCART RGB SCART Video)
ENG-11
Method 4
Interlace scan
Video
Cables
OR
Component Jacks