Feature Buttons; Dss Console Led Indications - Toshiba Strata DK16 User Manual

STRATA DK ADD-ON MODULE / DSS CONSOLE
2-2

FEATURE BUTTONS

The DSS console has 60 buttons which can be assigned with any of the
following features:
All Call Page
Press the All Call (or AC) button to page a group of telephone
speakers assigned in system programming.
Night Transfer
Press the Night 1 (or NT) button to change the ringing pattern of
incoming calls.
CO Line Access
Press a Line (or CO) button to answer an incoming call or to seize a CO
line to make an outgoing call.
Direct Station Selection (DSS)
Press a DSS button to transfer an outside call to a station or to make a
call to a station. The label of each DSS button is designated by the
intercom number of the station to which it is assigned. (See Chapter 1 for
DSS button operation with the DSS console, as well as with the Add-on
Module.)
Speed Dial
Press a SD button to speed dial a telephone number or feature access
code(s) assigned to the button. SD buttons can be either for System
Speed Dial numbers or Station Speed Dial numbers. Refer to the Strata
DK8 & DK16 Digital Telephone User Guide for instructions on assigning
Speed Dial numbers and for feature access codes.

DSS CONSOLE LED INDICATIONS

The button LEDs on the DDSS2060 and the DDSS1060 DSS console
models light as red or green. The LEDs will light green during the
following conditions:
A Line (CO) button LED will be green and winking when the CO line
is in-use by the console user.
A DSS button LED will be green and flashing when calling or
transferring an outside call to a station. (If calling a station, the LED
will turn red and steady as soon as the called station answers; if
transferring to a station, the LED will turn red and steady as soon as
the DSS console attendant hangs up to complete the transfer.)
DSS CONSOLE