Setting Up The System Options; Set Top Box Control - Samsung DVD-AR650 Instruction Manual

DVD-Recorder
System
No Disc
Timer Rec. Timer Rec.

Set Top Box Control

CM Skip Time : 15 Sec
Setup Setup
EP Mode Time : 6 Hours
Chapter Creator : Off
Quick Recording : Off
Anynet+(HDMI-CEC) : On
MOVE ENTER RETURN EXIT
DVD-Recorder Set Top Box Control
No Disc
Timer Rec. Timer Rec.
Control : Off
Off
On
Setup Setup Connection : CH3
CH Digit Lock : Off
Mode for SET button : Off
Brand Code : 0000
MOVE ENTER RETURN EXIT
DVD-Recorder Set Top Box Control
No Disc
Timer Rec. Timer Rec.
Control : Off
Connection : CH3
Setup Setup CH3
CH4
CH Digit Lock : Off
AV1
Mode for SET button : Off
AV2
Brand Code : 0000
MOVE ENTER RETURN EXIT
DVD-Recorder
Set Top Box Control
No Disc
Timer Rec. Timer Rec.
Control : Off
Setup Setup Connection : CH3
CH3
CH4
CH Digit Lock : Off
AV1
Mode for SET button : Off
AV2
Brand Code : 0000
MOVE ENTER RETURN EXIT

Setting Up the System Options

▌ Set Top Box Control
If you have your cable box/satellite receiver(set top box) connected
►
as shown on page 16, it can be controlled after setting up this menu.
►
►
1. With the unit in Stop mode/No Disc mode, press the MENU button on
►
►
the remote control.
►
Menu items differ depending on the disc type.
2. Select Setup using the ▲▼ buttons, then press the ENTER or ►
button.
3. Select System using the ▲▼ buttons, then press the ENTER or ►
button.
System menu will be displayed.
4. Select Set Top Box Control using the ▲▼ buttons, then press the
ENTER or ► button.
Set Top Box Control menu will be displayed.
5. Select the desired sub menu(Control, Connection, CH Digit Lock,
Mode for SET button, and Brand Code) using the ▲▼ buttons, then
press the ENTER or ► button.
Control
Select the sub item(Off or On) using the ▲▼ buttons, then press the
ENTER button.
►
►
• Off : Turns off the cable box or satellite receiver (set top box) control
►
function. Select this if you do not want to use the supplied cable box
►
controller (IR Blaster).
►
• On : Turns on the cable box or satellite receiver (set top box) control
function.
Connection
Select the sub item (AV1, S-Video, CH3, CH4, AV2) using the ▲▼
buttons, then press the ENTER button.
►
If you connect your cable box or satellite receiver (set top box) to the
►
► recorder's audio/video input. (page 16)
►
• AV1 : Select this when the cable box or satellite receiver (set top box) is
►
connected to the DVD recorder's AV 1 IN jacks.
You can watch the output of the cable box or satellite receiver (set top box)
connected to AV1 when the Recorder is powered off.
• S-Video : Select this when the cable box or satellite receiver (set top box)
is connected to the DVD recorder's S-Video IN jack.
You can't select AV1 when the cable box or satellite receiver (set top box)
is connected to the S-Video input.
• AV2 : Select this when the cable box or satellite receiver (set top box) is
connected to the DVD recorder's AV 2 IN jacks.
If you connect your cable box or satellite receiver (set top box) to the
recorder's antenna input. (page 16)
• CH3 or CH4 : Select the output channel from CH3 or CH4 when the
cable box or satellite receiver (set top box) is connected to the DVD
►
►
recorder's VHF/UHF IN jack.
►
►
►
■ See the instruction supplied with your cable box or satellite
receiver (set top box) to confi rm the box's antenna output channel.
English - 32