Related Manuals for Aqua One Maxi 101
Summary of Contents for Aqua One Maxi 101
- Page 1 Maxi Powerheads 101-106 Coldwater Tropical Marine Instruction version: 18/03/2015 www.aquaone.com.au...
-
Page 2: Important Safeguards
Important Safeguards To guard against injury, basic safety precautions 8. Do not install or store the appliance where it will be should be observed, including the following: exposed to weather or temperatures below freezing. 9. Make sure any component mounted on a tank is securely installed before operating it. -
Page 3: Before First Use / Preparation
Before First Use / Preparation Read and follow all the instructions, even if you feel This product is shipped to you in a factory sealed you are familiar with the product and find a place to carton. Should the product malfunction in any way keep the instructions handy for future reference. - Page 4 9. Venturi & Air Line Replacement Parts & Filter Media Use Aqua One Genuine Spare Parts Only. See your local Aqua One Dealer and look for the number listed below for the spare part you require. Alternatively you will find these numbers on the silver label located on the product.
- Page 5 7. Venturi & Air Line Replacement Parts & Filter Media Use Aqua One Genuine Spare Parts Only. See your local Aqua One Dealer and look for the number listed below for the spare part you require. Alternatively you will find these numbers on the silver label located on the product.
- Page 6 8. 19mm Outlet Hosetail Replacement Parts & Filter Media Use Aqua One Genuine Spare Parts Only. See your local Aqua One Dealer and look for the number listed below for the spare part you require. Alternatively you will find these numbers on the silver label located on the product.
- Page 7 Installation 101/102 All Aqua One Maxi Power Heads come fully 2. Suction cups will fasten the powerhead to assembled and ready to use. the wall of your aquarium. 1. Decide which outlet option to use. 3. Use flow adjuster on the bottom of the...
- Page 8 Installation 103/104 All Aqua One Maxi Power Heads come fully 2. Suction cups will fasten the powerhead to assembled and ready to use. the wall of your aquarium. 1. Decide which outlet option to use. 3. Use flow adjuster on the bottom of the...
- Page 9 Installation 105/106 All Aqua One Maxi Power Heads come fully c) If the power head is to be used to run an assembled and are ready to use. under gravel filter remove the pre filter and attach the 21mm inlet adapter to the base of 1.
-
Page 10: Specifications
Specifications Model: Maxi 101 Model: Maxi 105 Dimensions: 6.5x4.5x5cm Dimensions: 15.5x8x12cm Maximum Flow Rate: 400L/hr Maximum Flow Rate: 2500L/hr Max Head Height: 0.65m Max Head Height: 2.5m Power Requirements: 220 – 240V AC Power Requirements: 220 – 240V AC Power Consumption: 6W... - Page 11 The Manufacturer or Distributor, of Aqua One goods, is collectively known herein as “Aqua One”. Please refer to contact details for Aqua One below or on the applicable Aqua One website. Any product that is covered by its own Guarantee (as enclosed with the product) is subject to the conditions of that Guarantee.
- Page 12 Inspiring Excellence in Fish Care!