Choosing A Connection - Samsung DVD Playe Owner's Manual

Choosing a Connection

The following show examples of connections commonly used to connect the DVD player with a
TV and other components.
Before Connecting the DVD Player
• Always turn off the DVD player, TV, and other components before you
connect or disconnect any cables.
• Refer to the owner's manual of the additional components you are connecting for
more information on those particular components.
Connection to an Audio System
Method 1
2ch Amplifier
Audio Input Jacks
Analog Audio Out
16
Method 2
AUDIO
Dolby Digital Decoder
Digital Audio Input Jack
OR
CD/DVD
PLAYER
Digital Audio Out
Choosing a Connection
Connection to a TV (For Video)
TV (Normal, Widescreen, Projection, etc..)
Method 1
Good picture
Basic Audio
TV
AV Cable
CD/DVD
PLAYER
Audio Output Jacks Video Output Jack S-Video Jack
• Method 1 DVD Player + TV with Video Input Jack
• Method 2 DVD Player + TV with S-Video Input Jack
Note • Please directly connect this unit's video outputs to the TV.
If you connect this unit to the TV via a VCR or play back via a
VCR, the copy card may cause disturbance in the picture.
Method 2
Better picture
S-Video
Cable
OR
17