Advertisement
Honda
CBR500R
V.A.L.E.™ Slip-on Exhaust System with M-2 Exhaust Canister
Part # 005-3950405-T
Qty. Description
1
Tarmac Muffler Canister
1
Slip-Tube
1
Clamp
2
Springs
1
Washer
1
Flange Nut
1
Socket Head Cap Screw
1
Spring Puller
1
Anti-Seize
Care & Cleaning
Keep system free of dirt and moisture. Store in a cool, dry place. Make sure vehicle is completely cool before maintenance.
Stainless Header System: Polished stainless steel pipes will turn a light golden hue after a few heat cycles, this is a normal characteristic of high quality stainless steel. Clean using
Part Number
a mild water based spray cleaner. Always apply cleaner or polish with a soft, clean cloth.
005-305-10
Titanium Header System: Polished titanium pipes will experience color shift ranging from deep blue/purple through amber after a few heat cycles. This is a normal characteristic of
005-39504S
high quality titanium. Clean using a mild water based spray cleaner. Always apply cleaner or polish with a soft, clean cloth.
005-27-59MSH
005-S45
Polished Aluminum Canisters: Use an aluminum or mag wheel polish to restore the bright finish to factory spec.
005-W08
Brushed Aluminum Canisters: Clean using a mild water based spray cleaner. Always apply cleaner or polish with a soft, clean cloth.
005-FN8
005-SH855
Carbon Fiber Canisters: Clean using a mild water based spray cleaner. Always apply cleaner or polish with a soft, clean cloth. Always make sure the fiberglass packing inside is in
005-SP
good condition and not burned out, as exhaust heat inside an empty canister will deteriorate the carbon fiber sleeve.
031-P09175
TBR sells repack kits (Road - #005-10038, Offroad - #005-10038MX) that include everything you need to easily do it yourself.
Titanium Mufflers: For cleaning use a mild water based spray cleaner. Always apply cleaner or polish with a soft, clean cloth. Always make sure the fiberglass packing inside is in
good condition and not burned out, as exhaust heat inside an empty canister will deteriorate the carbon fiber sleeve.
TBR sells repack kits (Road - #005-10038, Offroad - #005-10038MX) that include everything you need to easily do it yourself.
Repack all road canisters every 3,000 miles. Part #005-10038
Repack all offroad canisters after every 10 hours of use. Part #005-10038MX
NEVER dyno test your bike with carbon fiber or titanium canisters installed - the intense heat and lack of cooling air can quickly burn through the canister material. Two Brothers
Racing does not provide a warranty for burned canisters.
Two Brothers Racing products are intended for closed course competition purposes only, and therefore are sold "as is" without warranty. Two Brothers Racing specifically disclaims
any warranties of merchantability or fitness for a particular purpose and disclaims all responsibility for consequential and incidental damages or any other losses arising from the use
of these products or parts. Not tested for use with OEM or aftermarket accessories.
Care & Cleaning
Warranty Information
Advertisement
