Related Manuals for Zenport INDUSTRIES EP3
Summary of Contents for Zenport INDUSTRIES EP3
-
Page 1: Ep2/Ep3 Epruner, Electric Pruning Shears
EP2/EP3 ePruner, ePruner, Electric Pruning Shears User’s Manual User’s Manual CAUTION: PLEASE PLEASE READ MANUAL BEFORE USING TOOL BEFORE USING TOOL! -
Page 2: Table Of Contents
FAMILIARIZE YOURSELF WITH TABLE OF CONTENTS FOR EASE OF USE! Contents EP2/EP3 ePruner, Electric Pruning Shears ..................... 1 Safety Notice ..............................3 Safety Symbols ............................... 3 Symbols in manual............................3 Symbols on battery ............................4 Symbols on charger............................4 General Power Tool Safety Instructions ......................5 Work Area Safety ............................ -
Page 3: Safety Notice
Safety Notice Before using your new Battery Powered Electric Pruner (ePruner) for the first time, please read instruction manual carefully. Familiarize yourself with the various sections. Keep manual in a safe and easily accessible place to ensure the proper and safe handling of this tool. -
Page 4: Symbols On Battery
Symbols on battery Ni-MH or Li-ion battery. Do not dispose with household trash. Do not dispose the battery in fire as it may explode. Do not store battery in water or wet environment as it may explode. Do not expose the battery to direct sunlight or hot surface as it may explode (Max temperature 140°F/60℃). -
Page 5: General Power Tool Safety Instructions
General Power Tool Safety Instructions Warning! Read all safety directions and instructions. Omissions in the compliance with safety directions and instructions can cause electrical shock, fire and/or severe injuries. Retain all safety directions and instructions for future use. The term “Power Tools” used in the safety instructions refers to electric-operated power tools (with power cord) and to battery-operated power tools (without power cord). -
Page 6: Power Tool Use Safety
Power Tool Use Safety 1. Don’t overload tool by using outside the designed operation specifications. 2. Don’t attempt to use tool if the power switch doesn’t work. Contact your local authorized repair center for repair immediately. 3. Disconnect tool from power source before adjusting, repair, or storage of tool. 4. - Page 7 Safety Tips： ： ： ： Wear suitable work clothes such as boots with non-slip soles, sturdy long trousers, gloves and goggles. Threading the power cord through a picking sleeve will prevent the cord from tangling or getting cut. Do not wear long flowing clothing or jewelry, as this may be caught by moving parts.
- Page 8 Using Charger Correctly： ： ： ： a. Use original charger with rechargeable battery only. Other alternative chargers and batteries can cause fire or explosion. b. Always check charger, wire and plug before using. Don’t use damaged charger or repair yourself for safety reasons. c.
-
Page 9: Designed Purpose Of Tool
Designed Purpose of Tool ： The Zenport ePruner is designed for cutting plants, vines, brush and branches. Cutting any other material may cause damage to tool and/or yourself. Tool is designed for adult use only. Pruner Diagram and Description ： This tool features blades that are made of SK5 Japanese steel. -
Page 10: Specifications
Part List： ： ： ： ． C utting Blade ． C ounter Bade ． B lade Adjustment Gear Clip ． T rigger Guard ． T rigger ． H andle Grip ． B attery Connector ． P runer Battery Wire ． B attery ．... -
Page 11: First Time Use
First Time Use ： Open package carefully, inspection parts below: • Pruning Shear • Battery • Charger • Pruner Battery Wire • Harness • Maintenance Tool Kit • Wire Straps • Manual Disconnect Battery From Tool Before Charging. • Always check battery connectors – make sure connections are dry and clean before charging. -
Page 12: Working Environment
Velco fastener and straps. 3. Connect the cable with battery tightly. Avoid cross threading by applying a small amount of grease or oil to the threads. With use the threads will move easier. 4. Put the harness on by securing cross buckles and belt. The holster is designed to be looped through the belt. -
Page 13: Cleaning
and battery is tight; if the wire is loose, tighten and turn power on again. If pruner is not working and you hear four continuous warning beeps, charge the battery immediately. 5. Don’t overload while cutting, as damage will occur. 6. -
Page 14: Charge Indicator
• Charge battery fully before storing for long periods of time. • Charge battery every month if placed in storage for long periods of time. Charge Indicator ： Lithium Battery Battery capactiy Three green squares 80%-100% Two green squares 50%-80% One green squares 30%-50% One red square... -
Page 15: Troubleshooting
Troubleshooting ： Issue Reason Solution ePruner will not start Battery Depleted Charge Battery Disconnected Battery Connect Battery Power Switch Off Switch On Power Switch Failure Notify Dealer Runs abnormal Connector Damaged Notify Dealer Trigger Switch Damaged Blade super hot Blade Dull Sharpen Blade or Replace Blade Damaged Sharpen Blade or Replace...