K-Tech ET401 Installation Manual

SPECIFICATIONS
Power Requirements:
Phone line with 30mA minimum loop current
Maximum phones per line - recommended: 1
Physical Dimensions
Sentry:
Enclosure:
7.5" (19.5 cm) X 5." (12.7 cm) X 2.0" (5.1 cm)
Liberator:
Enclosure:
6.75" (17.1 cm) X 6.25" (15.8 cm) X 1.0" (2.6cm)
Fortress Std:
Front Plate:
12.5" (31.8cm) X 10" (25.4cm) X 0.125" (0.3 cm)
Option:
10.5"(26.7cm) X 6.5"(16.5 cm) X 0.125"(0.3cm)
Rear Enclosure:
8" "( 20.3 cm) X 4.75"( 12.0 cm) X 2.3" (5.8cm)
Rough cut:
8" X 5." ( 20.3 cm X 12.7 cm)
Commander :
Mounting plate:
Std:
9.5" (24.1cm) X 4.75" (12.1 cm) X 2.0" (5.1cm)
U model:
7" (17.8 cm) X 4.75" (12.1 cm) X 1.5" (38.1 cm)
FCC Information
The K-Tech ET401 Series meets FCC 15 and 68
standards, IC and ETL approval.
FCC Registration # ERC-USA-44557-TE-T
IC# 164311441A
REN (Ringer Equivalence Number) 1.0
THE INFORMATION BELOW IS IMPORTANT.
YOU MUST HAVE THE SERIAL NUMBER
AVAILABLE WHEN CALLING TECH SUPPORT.
K-Tech International Inc. SERIAL #
4 _ _ _ _ _
Part # PCB045 Rev. ___
Serial Number: ____________________________
Date Installed: ____________________________
Installed by: ____________________________
Phone Line #: ____________________________

Phone line Voltage: 48VDC (POTS or CO line)

24VDC (PBX System)

Other ____________________
Phone Number(s)
Dialing:
1. ___________________________________
2. ___________________________________
3. ___________________________________
4. ___________________________________
5. ___________________________________
Voice message
________________________________________________
________________________________________________
________________________________________________
K-Tech International, Inc
56 Ella Grasso Ave
Torrington, CT 06790 USA
Phone (860) 489-9399
Toll Free (800) 993-9399
Fax (860) 489-4399
Email: support@KTechOnline.com
Website: www.KTechOnline.com
BOK062 041811
Keep This Booklet for
Printed in USA
K-Tech
1-800-993-9399
ET401
Installation Guide
Reference
Additional information is available at
www.KTechOnline.com