Choosing A Connection - Samsung 2.0030516154438e16 User Manual

(CA) DVD-C621 3/7/02 2:53 PM Page 14

Choosing a Connection

The following show examples of connections commonly used to connect the DVD player with a
TV and other components.
Before Connecting the DVD Player
• Always turn off the DVD player, TV, and other components before you
connect or disconnect any cables.
• Refer to the owner's manual of the additional components you are
connecting for more information on those particular components.
Connection to an Audio System
Method 1
2ch Amplifier
Audio Input Jacks
Analog Audio Out
14
Method 2
AUDIO
Dolby Digital Decoder
Digital Audio Input Jack
OR
DVD
Digital Audio Out
Choosing a Connection
Connection to a TV (For Video)
TV (Normal, Widescreen, Projection, etc..)
Method 1
Good picture
Basic Audio
TV
AV Cable S-Video
OR
DVD
Audio Output Jacks Video Output Jack S-Video Jack
• Method 1 DVD Player + TV with Video Input Jack
• Method 2 DVD Player + TV with S-Video Input Jack
(If S-Video is selected in the VIDEO OUT SELECT.)
• Method 3 DVD Player + TV with Component Video Jacks
(If Y, P or Pr is selected in the VIDEO OUT SELECT.)
b
NOTE
• If Y, P or P is selected, S-Video will not work.
b r
• If S-Video is selected, Y, P or P will not work.
b r
Method 2 Method 3
Better picture
Best picture
Video Cables
Cable
OR
Component Video
Jacks
15